Influência do cloreto de cálcio no tempo de presa, solubilidade, desintegração, pH e atividade antimicrobiana do MTA e do cimento Portland branco com radiopacificador
Carregando...
Data
2007-05-21
Autores
Bortoluzzi, Eduardo Antunes [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Estadual Paulista (Unesp)
Resumo
O objetivo deste estudo foi avaliar a influência do acréscimo de 10% de cloreto de cálcio (CaCl2) no tempo de presa, solubilidade, desintegração, pH e atividade antimicrobiana do MTA Branco (MTA) e cimento Portland branco com radiopacificador (CPB). O ProRoot MTA (PRO), com e sem CaCl2, também foi incluído no teste de atividade antimicrobiana. O teste do tempo de presa inicial seguiu a especificação #57 da ADA e o do tempo de presa final a da ASTM (C266-03). Para os testes de solubilidade, desintegração e pH foram utilizados 6 anéis de teflon para cada cimento, medindo 4 mm de espessura e 12 mm de diâmetro interno com parede de 2 mm. Depois de preenchidos, os anéis foram mantidos por 24 e 72 h e 7, 14 e 28 dias em água MiliQ, que foi renovada no fim de cada período. Após cada período, os cimentos foram desidratados em dessecador com sílica por 24 h. Foi registrado o peso de cada cimento hidratado e desidratado. O pH da água onde os cimentos permaneceram imersos foi medido por um pHmetro. A atividade antimicrobiana foi avaliada pela técnica da difusão em ágar, empregando o método do poço. Os microrganismos utilizados foram procedentes da ATCC: Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, Enterococcus faecalis, Streptococcus mutans, Candida albicans, Staphylococcus epidermidis. O acréscimo do CaCl2 proporcionou uma diminuição de 50% do tempo de presa inicial dos cimentos. Já o tempo de presa final do MTA foi diminuído em 35,5% e o do CPB em 68,5%. Os resultados do teste de solubilidade mostraram que o MTA+CaCl2 absorveu água e não perdeu peso com o passar do tempo, exceto no período de 24 h. O MTA, tanto hidratado quanto desidratado, perdeu peso, mas com valores aceitáveis pela ADA. O CPB apresentou maior solubilidade, a qual foi diretamente proporcional ao tempo de imersão das amostras. Entretanto, o acréscimo do CaCl2 ao CPB diminuiu...
The aim of this study was to evaluate the influence of adding 10% calcium chloride (CaCl2) on the setting time, solubility and dissolution, pH, and antimicrobial activity of white MTA (MTA) and Portland cement with radioopacifier (CPB). ProRoot MTA (PRO) with and without CaCl2 was also included in the antimicrobial activity test. Setting time testing followed the specification #57 of ADA and final setting time testing was made according to C266-03 ASTM standard. Six teflon rings (4 mm thickness, 12 mm internal diameter, 2 mm height) used for the solubility, dissolution, and pH tests were stored in deionized water for 24h, 72 h, 7d, 14d, and 28d, which was renewed at the end of each storage period. After the storage periods, the specimens were dehydrated in a desiccator containing silica gel for 24h. The specimens were weighted before and after dehydration and pH of water was measured using a pH-meter. Antimicrobial activity was evaluated using an Agar well diffusion technique. The following microorganisms were used: Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, Enterococcus faecalis, Streptococcus mutans, Candida albicans, and Staphylococcus epidermidis (ATCC). Adding of CaCl2 yielded a 50% reduction of the initial setting of the cements. Final setting time of MTA cement was reduced approximately 35.5% and CPB's final setting time was reduced by 68.5%. Solubility results have shown that the MTA+ CaCl2 absorbed water and did not lost weight with time, except for the 24h-storage period. Hydrated and dehydrated MTA presented weight loss, but within acceptable limits stated by ADA. CPB presented greater solubility, proportional to the immersion time, i.e., the greater the storage period the greater the weight loss. However, adding CaCl2 to the CPB did not decrease the solubility. Both CPB and CPB+ CaCl2 did not satisfy ADA requirements. (Complete abstract, click electronic access below)
The aim of this study was to evaluate the influence of adding 10% calcium chloride (CaCl2) on the setting time, solubility and dissolution, pH, and antimicrobial activity of white MTA (MTA) and Portland cement with radioopacifier (CPB). ProRoot MTA (PRO) with and without CaCl2 was also included in the antimicrobial activity test. Setting time testing followed the specification #57 of ADA and final setting time testing was made according to C266-03 ASTM standard. Six teflon rings (4 mm thickness, 12 mm internal diameter, 2 mm height) used for the solubility, dissolution, and pH tests were stored in deionized water for 24h, 72 h, 7d, 14d, and 28d, which was renewed at the end of each storage period. After the storage periods, the specimens were dehydrated in a desiccator containing silica gel for 24h. The specimens were weighted before and after dehydration and pH of water was measured using a pH-meter. Antimicrobial activity was evaluated using an Agar well diffusion technique. The following microorganisms were used: Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, Enterococcus faecalis, Streptococcus mutans, Candida albicans, and Staphylococcus epidermidis (ATCC). Adding of CaCl2 yielded a 50% reduction of the initial setting of the cements. Final setting time of MTA cement was reduced approximately 35.5% and CPB's final setting time was reduced by 68.5%. Solubility results have shown that the MTA+ CaCl2 absorbed water and did not lost weight with time, except for the 24h-storage period. Hydrated and dehydrated MTA presented weight loss, but within acceptable limits stated by ADA. CPB presented greater solubility, proportional to the immersion time, i.e., the greater the storage period the greater the weight loss. However, adding CaCl2 to the CPB did not decrease the solubility. Both CPB and CPB+ CaCl2 did not satisfy ADA requirements. (Complete abstract, click electronic access below)
Descrição
Palavras-chave
Cimentos dentários, Cloreto de cálcio, Materiais restauradores do canal radicular, Calcium chloride, Dental cements
Como citar
BORTOLUZZI, Eduardo Antunes. Influência do cloreto de cálcio no tempo de presa, solubilidade, desintegração, pH e atividade antimicrobiana do MTA e do cimento Portland branco com radiopacificador. 2007. 77 f. Tese (doutorado) - Universidade Estadual Paulista, Faculdade de Odontologia de Araraquara, 2007.