DESIGN AND TEST OF A 7-T SPLIT-PAIR MAGNET FOR MAGNETIC SEPARATION
Nenhuma Miniatura disponível
Data
1994-07-01
Autores
Baldan, C. A.
Shigue, C. Y.
Pinatti, D. G.
Título da Revista
ISSN da Revista
Título de Volume
Editor
Institute of Electrical and Electronics Engineers (IEEE)
Resumo
A 160 mm bore, 7 T split-pair magnet was constructed and tested aiming to mineral processing through HGMS (high gradient magnetic separation) or HCMS (helical channel magnetic separation.) This work describes the design and test results of the pair of coils operating under current in parallel mode. In the case of antiparallel current mode large repulsive force between coils is generated and a strong magnetic field gradient outside the magnet is created. A continuous magnetic separation system made with a helical channel magnetic separator for application in TiO2 processing is analysed.
Descrição
Palavras-chave
Como citar
IEEE Transactions on Magnetics. New York: IEEE-Inst Electrical Electronics Engineers Inc., v. 30, n. 4, p. 1931-1933, 1994.