Sintering of tin oxide processed by slip casting
Nenhuma Miniatura disponível
Data
2000-12-01
Autores
Garcia dos Santos, Iêda Maria
Longo, Elson [UNESP]
Varela, José Arana [UNESP]
Leite, Edson Roberto
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
Sintering of SnO 2 compacts, obtained through slip casting, was studied by means of dilatometry, Hg porosimetry, scanning electron microscopy, and density measurement (Archimedes method). Sintering is strongly influenced by the green microstructure. Moreover, the sintering mechanisms are not dependent on the slurries' solid content up to 50% of solids in volume. Above this value, agglomerates are formed, leading to differential sintering inside and among the agglomerates. Another important point is the reduction of the temperature of maximum shrinkage rate when compared to tin oxide processed by isostatic pressing. This reduction is more accentuated when ammonium hydroxide is added to the suspension. (C) 2000 Published by Elsevier Science Ltd. All rights reserved.
Sintering of SnO 2 compacts, obtained through slip casting, was studied by means of dilatometry, Hg porosimetry, scanning electron microscopy, and density measurement (Archimedes method). Sintering is strongly influenced by the green microstructure. Moreover, the sintering mechanisms are not dependent on the slurries' solid content up to 50% of solids in volume. Above this value, agglomerates are formed, leading to differential sintering inside and among the agglomerates. Another important point is the reduction of the temperature of maximum shrinkage rate when compared to tin oxide processed by isostatic pressing. This reduction is more accentuated when ammonium hydroxide is added to the suspension.
Sintering of SnO 2 compacts, obtained through slip casting, was studied by means of dilatometry, Hg porosimetry, scanning electron microscopy, and density measurement (Archimedes method). Sintering is strongly influenced by the green microstructure. Moreover, the sintering mechanisms are not dependent on the slurries' solid content up to 50% of solids in volume. Above this value, agglomerates are formed, leading to differential sintering inside and among the agglomerates. Another important point is the reduction of the temperature of maximum shrinkage rate when compared to tin oxide processed by isostatic pressing. This reduction is more accentuated when ammonium hydroxide is added to the suspension.
Descrição
Palavras-chave
Microstructure-final, Porosimetry, Sintering, Slip casting, SnO 2, Density measurement (specific gravity), Hot isostatic pressing, Metal casting, Porosity, Reduction, Scanning electron microscopy, Shrinkage, Archimedes method, Dilatometry, Green microstructure, Tin oxide, Tin compounds, casting, ceramics, porosity, sinter
Como citar
Journal of the European Ceramic Society, v. 20, n. 14-15, p. 2407-2413, 2000.