Publicação: Effect of compatibilizer in acrylonitrile-butadiene-styrene toughened nylon 6 blends: Ductile-brittle transition temperature
Carregando...
Data
Autores
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Acesso restrito
Resumo
The ductile-brittle transition temperatures were determined for compatibilized nylon 6/acrylonitrile-butadiene-styrene (PA6/ABS) copolymer blends. The compatibilizers used for those blends were methyl methacrylate-co-maleic anhydride (MMA-MAH) and MMA-co-glycidyl methacrylate (MMA-GMA). The ductile-brittle transition temperatures were found to be lower for blends compatibilized through maleate modified acrylic polymers. At room temperature, the PA6/ABS binary blend was essentially brittle whereas the ternary blends with MMA-MAH compatibilizer were supertough and showed a ductile-brittle transition temperature at -10°C. The blends compatibilized with maleated copolymer exhibited impact strengths of up to 800 J/m. However, the blends compatibilized with MMA-GMA showed poor toughness at room temperature and failed in a brittle manner at subambient temperatures.
Descrição
Palavras-chave
Acrylonitrile-butadiene-styrene, Blends, Compatibilization, Nylon 6, Toughness, Amines, Composition effects, Copolymers, Impact testing, Nylon polymers, Organic acids, Phase transitions, Polymer blends, Temperature, Compatibilizers, Compatibilizing agents, Ductile-brittle transitions, Maleated copolymers, ABS resins, mechanical property, nylon 6, polymer blend
Idioma
Inglês
Como citar
Journal of Applied Polymer Science, v. 90, n. 10, p. 2643-2647, 2003.
