Publicação: Avaliação da distribuição da densidade em MDF a partir da técnica da onda de ultra-som
Carregando...
Data
2007-06-01
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Acesso aberto
Resumo
The goal of this research was to determine the density distribution in medium density fiberboard (MDF), manufactured with polyurethane derived from castor oil using, ultrasonic wave technique. The equipment used in this test is Steinkamp BP7 with plan and exponential transducers, both with 45 kHz frequencies, located in several zones on the plate in order to determine wave ultrasonic velocity. The Pinus caribaea and Eucalyptus grandis fiberboard were manufactured in the quality control and products development laboratory of Duratex with 500 mm long, 500 mm large, 8 and 15 mm of thickness. Three MDF for each fiber specimen and thickness were fabricated, totalizing twelve plates tested. The MDF were produced with 5% polyurethane addition, in temperature of 160°C, tension press of 53 bars and addition of moisture content of 12%. For determination of fiberboard density, samples were extracted from the same zones where the wave ultrasonic velocity was determined. In this case, DAX-Ray equipment was used. Statistical analysis shows good agreement with wave ultrasonic velocity and the density profile, validating the application of non-destructive technique in order to determine the density profile of MDF's.
Descrição
Palavras-chave
Medium density fiberboard, Non-destructive test, Ultrasonic wave, DAX-Ray, Medium density fiberboard (MDF), Steinkamp BP7, Nondestructive examination, Paperboards, Polyurethanes, Statistical methods, Transducers, Vegetable oils, Density (specific gravity), Castor Oil, Density Measurement, Fiber Boards
Idioma
Português
Como citar
Scientia Forestalis/Forest Sciences, n. 74, p. 19-26, 2007.
