Tungsten permanent chemical modifier for fast estimation of Se contents in soil by graphite furnace atomic absorption spectrometry
Nenhuma Miniatura disponível
Data
2003-07-02
Autores
Rosa, C. R.
Freschi, GPG
De Moraes, M.
Neto, JAG
Nobrega, J. A.
Nogueira, ARA
Sacramento, L. V.
Título da Revista
ISSN da Revista
Título de Volume
Editor
Amer Chemical Soc
Resumo
A tungsten carbide coating on the integrated platform of a transversely heated graphite atomizer was used as a modifier for the direct determination of Se in soil extracts by graphite furnace atomic absorption spectrometry. Diethylenetriaminepentaacetic acid (0.0050 mol L-1) plus ammonium hydrogencarbonate (1.0 mol L-1) extracted predominantly available inorganic selenate from soil. The formation of a large amount of carbonaceous residue inside the atomizer was avoided with a first pyrolysis step at 600 degreesC assisted by air during 30 s. For 20 muL of soil extracts delivered to the atomizer and calibration by matrix matching, an analytical curve (10.0-100 mug of L-1) with good linear correlation (r = 0.999) between integrated absorbance and analyte concentration was established. The characteristic mass was similar to63 pg of Se, and the lifetime of the tube was similar to750 firings. The limit of detection was 1.6 mug L-1, and the relative standard deviations (n = 12) were typically <4% for a soil extract containing 50 mug of L-1. The accuracy of the determination of Se was checked for soil samples by means of addition/recovery tests. Recovery data of Se added to four enriched soil samples varied from 80 to 90% and indicated an accurate method.
Descrição
Palavras-chave
selenium, soil, diethylenetriaminepentaacetic acid, tungsten permanent modifier, GFAAS
Como citar
Journal of Agricultural and Food Chemistry. Washington: Amer Chemical Soc, v. 51, n. 14, p. 3920-3923, 2003.