Modelagem numérica do escoamento em válvulas automáticas de compressores pelo Método da Fronteira Imersa
Carregando...
Data
2010-08-30
Autores
Rodrigues, Tadeu Tonheiro [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Estadual Paulista (Unesp)
Resumo
A compreensão do escoamento em válvulas de compressores herméticos alternativos é de fundamental importância para introduzir modificações no projeto delas de maneira a aumentar a performance dos compressores, e por fim, dos ciclos de refrigeração. A válvula do compressor é um dispositivo ímpar, umas vez que seu funcionamento se dá pela ação da pressão exercida pelo escoamento, caracterizando um problema de forte interação fluido- estrutura. O uso da modelagem numérica através das ferramentas da mecânica dos fluidos computacional (CFD) tem se destacado como a alternativa mais dinâmica para o estudo do fenômeno. O trabalho desenvolvido foi voltado para o estudo numérico do escoamento através do difusor radial, o qual é um modelo simplificado da válvula, com o emprego do Método da Fronteira Imersa com Modelo Físico Virtual para a modelagem do disco superior do difusor (palheta). O ponto forte desta metodologia é que a representação de regiões sólidas é feita pelo cálculo de um campo de força, o qual é introduzido nas equações das células na vizinhança do sólido. Este procedimento dispensa o uso de malhas que se adaptam ao corpo, possibilitando o uso de malhas cartesianas convencionas para modelar geometrias complexas e móveis. A metodologia foi acoplada com a solução das equações governantes do escoamento em coordenadas cilíndricas através do Método dos Volumes Finitos. Inicialmente, a metodologia foi validada, utilizando como dados de referência resultados provenientes de estudos numéricos e experimentais, e foi avaliada a influência dos parâmetros do procedimento na qualidade final dos resultados. Na segunda etapa foram desenvolvidos estudos preliminares referentes ao movimento do disco superior, com a imposição artificial dos processos de abertura e fechamento da válvula. Os resultados obtidos mostraram que a metodologia adotada...
The fully understanding of the flow through automatic valves of alternative hermetic compressors is essentiall to introduce modifications in its project aiming the improvement of the compressor performance and, also, the refrigeration cycle. The compressor valve is a singular device, once its operation is ruled by the flow pressure, characterizing a case with a strong fluid-structure interaction. The using of numerical tools trough the methods of computational fluid dynamics (CFD) has gained especial attention due to its flexibility to study the phenomenon. The present work was developed to study numerically the flow through the radial diffuser, which is a simplified model of the valve, with the employment of the Immersed Boundary Method with Virtual Physical Model to modeling the superior disk (valve reed). The main advantage of this methodology is that the modeling of solid boundaries is performed with the calculus of a force field, which is introduced in the cells equations nearby the solid. This procedure dispenses the using of body-fitted meshes, enabling the adoption of conventional Cartesian meshes to model complex and moving geometries. The methodology was coupled with the solution of the governing equations in cylindrical coordinates though the Finite Volume Method. Firstly, the methodology was validated, confronting the results obtained with data from numerical and experimental studies, where the influence of the main parameters in the quality of the final results was evaluated. In the second step were developed preliminary studies concerning the movement of the superior disk, whose opening and closing movements were artificially imposed. The results obtained showed that the adopted methodology is quit promising and flexible, and can be employed in more refined studies to the comprehension of the flow through the valve regarding the fluid-structure interaction that rules the problem
The fully understanding of the flow through automatic valves of alternative hermetic compressors is essentiall to introduce modifications in its project aiming the improvement of the compressor performance and, also, the refrigeration cycle. The compressor valve is a singular device, once its operation is ruled by the flow pressure, characterizing a case with a strong fluid-structure interaction. The using of numerical tools trough the methods of computational fluid dynamics (CFD) has gained especial attention due to its flexibility to study the phenomenon. The present work was developed to study numerically the flow through the radial diffuser, which is a simplified model of the valve, with the employment of the Immersed Boundary Method with Virtual Physical Model to modeling the superior disk (valve reed). The main advantage of this methodology is that the modeling of solid boundaries is performed with the calculus of a force field, which is introduced in the cells equations nearby the solid. This procedure dispenses the using of body-fitted meshes, enabling the adoption of conventional Cartesian meshes to model complex and moving geometries. The methodology was coupled with the solution of the governing equations in cylindrical coordinates though the Finite Volume Method. Firstly, the methodology was validated, confronting the results obtained with data from numerical and experimental studies, where the influence of the main parameters in the quality of the final results was evaluated. In the second step were developed preliminary studies concerning the movement of the superior disk, whose opening and closing movements were artificially imposed. The results obtained showed that the adopted methodology is quit promising and flexible, and can be employed in more refined studies to the comprehension of the flow through the valve regarding the fluid-structure interaction that rules the problem
Descrição
Palavras-chave
Compressores - Valvulas, Método dos volumes finitos, Difusores radiais, Método da fronteira imersa, Modelo físico virtual, Compressor, Valve, Radial diffuser, Finite volume, Immersed boundary method
Como citar
RODRIGUES, Tadeu Tonheiro. Modelagem numérica do escoamento em válvulas automáticas de compressores pelo Método da Fronteira Imersa. 2010. 137 f. Dissertação (mestrado) - Universidade Estadual Paulista, Faculdade de Engenharia de Ilha Solteira, 2010.