Rompimento de barreiras: análise experimental e numérica na previsão de velocidades de propagação de frentes de material hiperconcentrado
Carregando...
Arquivos
Data
2007-12-04
Autores
Minussi, Roberta Brondani [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Estadual Paulista (Unesp)
Resumo
Denominam-se problemas tipo rompimento de barreira os fenômenos nos quais um fluido é liberado de maneira abrupta. Quando o fluido apresenta natureza hiperconcentrada, a relação entre a tensão de cisalhamento e a taxa de deformação pode se tornar não-linear, passando a apresentar reologia não-Newtoniana. Problemas deste tipo podem ser encontrados em muitos fenômenos tanto na natureza quanto em processos industriais. O estudo de tal problema é, geralmente, conduzido usando simplificações, como a aproximação de águas rasas e a separação do escoamento em regimes dominantemente inerciais ou viscosos. O presente trabalho é composto de duas partes, uma experimental e outra, numérica. No campo experimental, duas soluções controladas são usadas: soluções aquosas de açúcar e de Carbopol 940, esta última com várias concentrações volumétricas. O aparato experimental consiste em um canal retangular de acrílico, contendo uma comporta, a montante da qual, o fluido é retido e, pela ruptura (levantamento da comporta), começa a escoar. O escoamento é estudado através de técnicas avançadas de filmagem. No campo numérico, são realizadas simulações usando o programa CFX, no qual é usado um método de rastreamento de interface, o VOF e sem o emprego das simplificações citadas. Os resultados experimentais são comparados com os numéricos e com resultados da literatura que usam tais simplificações. Na comparação a aproximação de águas rasas, apesar de descrever bem a forma da interface, se distancia dos valores reais da posição da frente de onda.
The dam break problem describes a phenomenon in which there is an abrupt release of fluid. When the fluid is hiperconcentrated, the relation between the shear stress and the strain rate can become non-linear, and so present a non-Newtonian rheology. The non-Newtonian dam break problem may be found in many phenomena in nature and industrial process. The study of such a problem is, generally, conducted using simplified hypothesis such as the shallow water approximation and the separation of the flow in inertial and viscous dominated regimes. The present work is composed of two parts, one experimental and other, numerical. In the experimental field, two controlled solutions were used: water solutions of sugar and of Carbopol 940, the last one with a wide range of volume concentrations. These fluids have, respectively, Newtonian and non-Newtonian rheologies. The experimental setup consists of an acrylic rectangular channel, which has a dam and upstream of that the fluid is retained and, by the rupture, it begins to flow. The flow is studied by using advanced filming techniques. In the numerical field, simulations are conducted using the CFX software, which uses an interface tracking method, the VOF, and without the shallow water approximation and the division of the flow. So the experimental, numerical and literature results, that uses such simplifications, are compared and it is showed that the shallow water approximation, however describes very well the shape of the surface, is not accurate in calculate the wave front position.
The dam break problem describes a phenomenon in which there is an abrupt release of fluid. When the fluid is hiperconcentrated, the relation between the shear stress and the strain rate can become non-linear, and so present a non-Newtonian rheology. The non-Newtonian dam break problem may be found in many phenomena in nature and industrial process. The study of such a problem is, generally, conducted using simplified hypothesis such as the shallow water approximation and the separation of the flow in inertial and viscous dominated regimes. The present work is composed of two parts, one experimental and other, numerical. In the experimental field, two controlled solutions were used: water solutions of sugar and of Carbopol 940, the last one with a wide range of volume concentrations. These fluids have, respectively, Newtonian and non-Newtonian rheologies. The experimental setup consists of an acrylic rectangular channel, which has a dam and upstream of that the fluid is retained and, by the rupture, it begins to flow. The flow is studied by using advanced filming techniques. In the numerical field, simulations are conducted using the CFX software, which uses an interface tracking method, the VOF, and without the shallow water approximation and the division of the flow. So the experimental, numerical and literature results, that uses such simplifications, are compared and it is showed that the shallow water approximation, however describes very well the shape of the surface, is not accurate in calculate the wave front position.
Descrição
Palavras-chave
Reologia, Análise numérica, Fluidos newtonianos, Fluidos não newtonianos, Rompimento de barreira, Rheology, Herschel – Bulkley, Carbopol, Dam Break, Volume of Fluid (VOF)
Como citar
MINUSSI, Roberta Brondani. Rompimento de barreiras: análise experimental e numérica na previsão de velocidades de propagação de frentes de material hiperconcentrado. 2007. 128 f. Dissertação (mestrado) - Universidade Estadual Paulista, Faculdade de Engenharia de Ilha Solteira, 2007.