Estudo do sistema celulose bacteriana-poliuretano para a produção de novos compósitos

Carregando...
Imagem de Miniatura

Data

2007-07-10

Autores

Pinto, Elaine Ruzgus Pereira [UNESP]

Título da Revista

ISSN da Revista

Título de Volume

Editor

Universidade Estadual Paulista (Unesp)

Resumo

O desenvolvimento de novos materiais com fonte renovável, baixo custo, melhores propriedades físico-mecânicas e biodegradáveis tem se tornado o principal objetivo de muitas empresas e grupos de pesquisa. O principal objetivo deste trabalho foiestudare desenvolver materiais a partir de uma matriz de poliuretano (PU) derivada do óleo de mamona utilizando como reforço a fibra da celulose bacteriana (CB). O trabalho foi dividido em duas etapas, a primeira direcionada a escolher o melhor estado da fibra (úmida, seca ou liofilizada) e a melhor resina para a formação da matriz. Na segunda etapa, desenvolveram-se as condições de moldagem e compressão para a matriz e compósito. A formação dos compósitos na primeira etapa utilizou a fibra da CB em três estados diferentes, seca, úmida em pedaço, úmida triturada e liofilizada, e duas matrizes de resinas PU monocomponente com diferentes porcentagens de NCO livre para cada uma, na proporção de 80% de fibra CB e 20% da matriz PU. A partir dos resultados obtidos optouse por utilizar a fibra úmida e seca e a matriz para a moldagem foi desenvolvida como bicomponente, pois a monocomponente apresentou formação de bolhas devido à reação com a umidade e a presença de muito solvente. Na segunda etapa foram obtidos os compósitos com 10% de fibra seca com uma pequena porcentagem de água (7%) e 90% da matriz PU bicomponente. As condições de moldagem foram a 6 ton a 70ºC por 7h. Para a fibra úmida foi desenvolvido um processo de troca de solvente para diminuir a porcentagem de água com o objetivo de aumentar a interação com a matriz. Esse processo possibilita utilizar a fibra revestida com a resina em forma de tiras, fios ou manta como reforço na matriz PU ou em outras matrizes. A caracterização foi feita por Raio-X, Infravermelho, Termogravimetria, Calorimetria Exploratória Diferencial, Análise Dinâmico Mecânico e ensaios...
The development of new materials with renewable source, low cost, better physicsmechanical properties and biodegradable, has become the main objective of many companies and research groups. The main goal of this work was to study and to develop material from polyurethane matrix (PU) derivative from castor oil added to bacterial cellulose (BC) fiber as reinforcement. The present work was divided in two parts: first, a selection of adequate fiber (humid, dry or lyophilized) and adequate resin have been explored to prepare the matrix. In the second part, the conditions of molding and compression for the matrix and composite have been studied. The first stage of the composites were formed with different types of BC fiber, dry and humid like continuum, discontinue and lyophilized, the matrix used was PU monocomponent resin with different percentages of free NCO for each one, with the ratio 80% of BC fiber and 20% of PU matrix. From these results, it was possible to select the humid and dry fiber. The molding PU matrix was developed as bicomponent, because the monocomponent resin had several bubbles due to the high amount of solvent and reaction with humid. The second stage of the composites had 10% of dry fiber containing (7%) of water and 90% of bicomponent PU. The molding condition was 6 ton at 70ºC during 7h. To increase the interaction of the matrix and CB fiber, a process has been developed based on solvent exchange. The characterization was made by X-Ray Diffraction, Infrared, Thermogravimetry, Differential Scanning Calorimetry, Dynamic Mechanical Analysis and mechanical test of the tension and creep. The bicomponent matrix present viscoelastic properties and the reinforcement with BC enhanced some of the properties as: increases of the glass transition temperature; 5 times increment of elastic modulus, reduction of the storage module, low yield region and better behavior on creep. Therefore, these results are interesting and show that the dry.

Descrição

Palavras-chave

Materiais compósitos, Celulose bacteriana, Fibras, Polyurethane, Bacterial-cellulose

Como citar

PINTO, Elaine Ruzgus Pereira. Estudo do sistema celulose bacteriana-poliuretano para a produção de novos compósitos. 2007. 151 f. Dissertação (mestrado) - Universidade Estadual Paulista, Instituto de Química, 2007.