Tratamento de efluente de abatedouro de tilápia com adição de manipueira na fase anóxica
Carregando...
Data
2011-02-01
Autores
Kummer, Ana Carolina B [UNESP]
Andrade, Lidiana de
Gomes, Simone D
Fazolo, Ajadir
Hasan, Salah D. M
Machado, Fabiano
Título da Revista
ISSN da Revista
Título de Volume
Editor
Associação Brasileira de Engenharia Agrícola (SBEA)
Resumo
O objetivo deste trabalho foi avaliar a desnitrificação de efluente de abatedouro de tilápia, em reator em batelada. Para isto, foi avaliado o efluente gerado por uma indústria processadora de mandioca (manipueira) como fonte de carbono. Também foram avaliadas as condições de agitação do sistema. Os experimentos foram conduzidos em escala de laboratório, em que foram testados cinco níveis de agitação (20; 32; 60; 88 e 100 rpm) e cinco níveis de relação DQO/N (0,1; 1,0; 3,2; 5,4 e 6,3), configurando-se um planejamento do tipo Delineamento Composto Central Rotacional (DCCR), com quatro ensaios nos níveis +1 e - 1; quatro ensaios nos níveis dos pontos axiais (-1,414 e +1,414) e mais uma triplicata no ponto central (0), totalizando 11 ensaios. Avaliaram-se o desempenho da desnitrificação através da remoção de nitrato (%) e a remoção de nitrito (%). Durante o processo, também foram monitorados temperatura (ºC), pH e alcalinidade (mgCaCO3.L-1). Os resultados mostraram que a relação DQO/N teve influência significativa, com intervalo de confiança de 95%, sobre o processo de remoção de nitrato e nitrito, com faixa ótima de operação entre 3,2 e 5,4, cujas eficiências de remoção de nitrogênio foram de 100%.
The objective of this work was to evaluate the denitrification of tilapia slaughterhouse wastewater, in a batch reactor. For this, it was evaluated the wastewater from a cassava processing industry (manipueira) as a carbon source. It was also evaluated the shaking conditions of the process. The experiments were carried out in laboratory series, where five shaking levels were tested (20; 32; 60; 88 e 100 rpm) as well as five COD/N ratio levels (0.1; 1.0; 3.2; 5.4 and 6.3), forming a planning as a Central Composite Rotational Design (CCRD), with four essays in levels +1 and - 1; four essays on the axial points levels (-1.414 and +1.414) and one more triplicate in the central point (0), which meant eleven essays. The denitrification performance through the nitrate removal (%) and nitrite removal (%) were evaluated. During this process, temperature (ºC), pH and alkalinity (mgCaCO3.L-1) were also observed. The results showed that the COD/N ratio had significant influence, with a 95 % of confidence interval, on the process of nitrate and nitrite removal, with a great operation range, from 3.2 to 5.4, whose nitrogen removal efficiencies were 100 %.
The objective of this work was to evaluate the denitrification of tilapia slaughterhouse wastewater, in a batch reactor. For this, it was evaluated the wastewater from a cassava processing industry (manipueira) as a carbon source. It was also evaluated the shaking conditions of the process. The experiments were carried out in laboratory series, where five shaking levels were tested (20; 32; 60; 88 e 100 rpm) as well as five COD/N ratio levels (0.1; 1.0; 3.2; 5.4 and 6.3), forming a planning as a Central Composite Rotational Design (CCRD), with four essays in levels +1 and - 1; four essays on the axial points levels (-1.414 and +1.414) and one more triplicate in the central point (0), which meant eleven essays. The denitrification performance through the nitrate removal (%) and nitrite removal (%) were evaluated. During this process, temperature (ºC), pH and alkalinity (mgCaCO3.L-1) were also observed. The results showed that the COD/N ratio had significant influence, with a 95 % of confidence interval, on the process of nitrate and nitrite removal, with a great operation range, from 3.2 to 5.4, whose nitrogen removal efficiencies were 100 %.
Descrição
Palavras-chave
remoção biológica, desnitrificação, nitrato, nitrito, efluente de abatedouro de peixe, efluente de fecularia, biologic removal, denitrification, nitrate, nitrite, fish wastewater from slaughterhouse, cassava wastewater
Como citar
Engenharia Agrícola. Associação Brasileira de Engenharia Agrícola, v. 31, n. 1, p. 150-157, 2011.