Influencia de la refusion en las propiedades mecanicas y composicion quimica de aleaciones odontologicas
Nenhuma Miniatura disponível
Data
1999-01-01
Autores
Yamakami, W. J. [UNESP]
Ferreira, I. [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
The objective of the study presented in this article was to analyze the influence of remelting of two odontological alloys: Dentorium and Steeldent, on the mechanical properties and on the chemical composition. For the two alloys, samples, containing 10% and 50% new alloy, were subjected to tensile test, micrography and chemical analysis. The alloys presented similar mechanical properties, except for the elongation, which presented higher values for the Dentorium 50% new alloy. This is due to the smaller carbides formed in this sample. The remelting itself seems not to be responsible for these differences, but they are probably due to the lack of a good control of the casting process. The micrography showed a dendritic column matrix, with carbides in the interdentric region and inside dendritic grain. In the chemical composition was observed few elements percentage change.
Descrição
Palavras-chave
Carbides, Cobalt alloys, Composition effects, Mechanical properties, Metal casting, Metallographic microstructure, Remelting, Tensile testing, Micrography, Odontological alloys, Dental alloys
Como citar
Informacion Tecnologica, v. 10, n. 3, p. 59-63, 1999.