Plataforma inorgânica a base de apatitas de interesse biológico visando à liberação controlada de fármacos
Carregando...
Arquivos
Data
2012-01-20
Autores
Almeida Filho, Edson de [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Estadual Paulista (Unesp)
Resumo
Recobrimentos de apatitas foram realizados em superfícies de titânio modificadas por feixe de laser Yb:YAG a pressão e atmosfera ambiente. As apatitas foram depositadas pelo método biomimético usando três soluções SBF (Simulated Body Fluid) diferentes que simulam a concentração de sais dos fluídos corpóreos para obtenção das apatitas. As superfícies de titânio submetidas ao processo de fusão e solidificação rápida (ablação) foram imersas na solução de SBF, as quais permaneceram por 4 dias a 37 ºC. As amostras foram caracterizadas pelas técnicas de DRX, refinamento de Rietveld, FTIR, MEV e solubilidade. Os espectros de FTIR mostram bandas referentes às ligações químicas confirmadas pela análise de DRX e quantificadas pelo método de Rietveld. Os recobrimentos de apatitas foram submetidas ao teste de solubilidade em água destilada utilizando-se eletrodo de íons seletivos e titulação complexométrica a fim de estudar a cinética de liberação para as fases se apatitas
Apatite coatings were deposited on titanium surfaces modified by an Yb:YAG laser beam under ambient pressure and air. The apatites were deposited by a biomimetic method using three different SBF (simulated body fluid) solutions that mimic the concentration of salts in the body fluids to obtain the apatites. The titanium surfaces subjected to the process of rapid fusion and solidification (ablation) were immersed in the SBF solutions, remaining there for four days at 37ºC. The samples were characterized by X-ray diffraction (XRD), Rietveld refinement, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and solubility. The FTIR spectra showed bands corresponding to chemical bonds, which were confirmed by the XRD analysis and quantified by the Rietveld method. The apatite coatings were subjected to a solubility test in distilled water using ion-selective electrodes and complexometric titration to study the kinetics of drug release through the apatite phases
Apatite coatings were deposited on titanium surfaces modified by an Yb:YAG laser beam under ambient pressure and air. The apatites were deposited by a biomimetic method using three different SBF (simulated body fluid) solutions that mimic the concentration of salts in the body fluids to obtain the apatites. The titanium surfaces subjected to the process of rapid fusion and solidification (ablation) were immersed in the SBF solutions, remaining there for four days at 37ºC. The samples were characterized by X-ray diffraction (XRD), Rietveld refinement, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and solubility. The FTIR spectra showed bands corresponding to chemical bonds, which were confirmed by the XRD analysis and quantified by the Rietveld method. The apatite coatings were subjected to a solubility test in distilled water using ion-selective electrodes and complexometric titration to study the kinetics of drug release through the apatite phases
Descrição
Palavras-chave
Físico-química, Materiais biomédicos, Apatita, Physical chemistry, Biomedical materials, Apatite
Como citar
ALMEIDA FILHO, Edson de. Plataforma inorgânica a base de apatitas de interesse biológico visando à liberação controlada de fármacos. 2012. 121 f. Tese (doutorado) - Universidade Estadual Paulista, Instituto de Química de Araraquara, 2012.