Materiais meso-estruturados luminescentes
Carregando...
Arquivos
Data
2010-04-12
Autores
Rocha, Lucas Alonso [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Estadual Paulista (Unesp)
Resumo
Partículas esféricas de sílica mesoporosa foram obtidas a partir da síntese “template” pelo processo de pirólise de aerossol. O processo foi otimizado para a obtenção de materiais mesoporosos sem resíduos orgânicos e preparados em uma única etapa, eliminando assim, a longa etapa de remoção do surfactante na metodologia tradicional (tratamento térmico ou extração soxhlet, podendo durar dezenas de horas). A otimização do processo de pirólise de aerossol proposta nesta tese reduziu este tempo para apenas alguns minutos. Os materiais apresentaram uma área superficial (BET) de até 1028 m2 .g-1 , com volume de poros (BJH) de 0,58 cm3 .g-1 . Os difratogramas de raios-X indicaram um alto grau de organização com um arranjo hexagonal de poros, confirmado também pela microscopia eletrônica de transmissão. Além disto, bandas características de grupos orgânicos não foram observadas nos espectros de absorção na região do infra-vermelho para as amostras obtidas acima de 600ºC. Amostras dopadas com íons Eu3+ também foram preparadas durante a tese. A análise por espectroscopia de luminescência, para íons Eu3+ , indicou que o íon está encapsulado nos canais mesoporosos sem prévia modificação química da matriz. Posteriormente, moléculas de 1,10- Fenantrolina foram coordenadas ao íon Eu3+ aumentando a faixa espectral de excitação do íon (efeito antena). Além disto, partículas luminescentes também foram obtidas pela incorporação do complexo Eu(fod)3 ou rodamina-B nos poros das matrizes. Finalmente, testes de recobrimento (core shell, SiO2 mesoporoso-SiO2) das partículas luminescentes foram realizados e os resultados indicaram que independentemente da espessura obtida pelo processo de recobrimento, o grau de organização dos poros e a fotoluminescência não sofreram alterações
Spherical mesoporous silica particles were obtained using the template synthesis by spray pyrolysis process. The process was optimized for the preparation of the mesoporous materials in one-pot route without organic residues, eliminating thus, the long process of removal of the surfactant, usually used in the available methods (heat treatment or soxhlet extraction, which require several hours or days). The one- pot route proposed in this thesis reduced the extraction process to only a several minutes. These materials presented a surface area value (BET) of 1028m2 .g-1 and pore volume (BJH) was 0,58 cm3 .g-1 . The X-ray diffraction patterns and the transmission electronic micrographs show an ordered typical p6mm 2D hexagonal mesostructure. Characteristics bands of organic groups were not observed in the infra-red absorption spectra for the samples obtained at 600ºC. Moreover, SiO2 mesoporous doped with Eu3+ ions were also prepared. Luminescence data suggest that the Eu3+ ions were successful encapsulated into the channels of mesoporous silica without any preliminary chemical modification of the matrix. Moreover, extra ligands such as 1,10-Phenantroline can be further coordinated, increasing the spectral range excitation (antenna effect). Furthermore, luminescent particles were also prepared by the wet impregnation of Eu(fod)3 complex and rhodamine-B molecules. Finally, tests of coating (core shell, SiO2 mesoporous-SiO2) of luminescent particles had been carried through and the The results obtained show spherical shape and the observation of a highly ordered hexagonal array of mesochannels further confirms the 2D hexagonal p6m structure. Luminescence results reveal that rhodamine-B has been successfully encapsulated into the channels of mesoporous particles. Silica coating has been observed in TEM measurements
Spherical mesoporous silica particles were obtained using the template synthesis by spray pyrolysis process. The process was optimized for the preparation of the mesoporous materials in one-pot route without organic residues, eliminating thus, the long process of removal of the surfactant, usually used in the available methods (heat treatment or soxhlet extraction, which require several hours or days). The one- pot route proposed in this thesis reduced the extraction process to only a several minutes. These materials presented a surface area value (BET) of 1028m2 .g-1 and pore volume (BJH) was 0,58 cm3 .g-1 . The X-ray diffraction patterns and the transmission electronic micrographs show an ordered typical p6mm 2D hexagonal mesostructure. Characteristics bands of organic groups were not observed in the infra-red absorption spectra for the samples obtained at 600ºC. Moreover, SiO2 mesoporous doped with Eu3+ ions were also prepared. Luminescence data suggest that the Eu3+ ions were successful encapsulated into the channels of mesoporous silica without any preliminary chemical modification of the matrix. Moreover, extra ligands such as 1,10-Phenantroline can be further coordinated, increasing the spectral range excitation (antenna effect). Furthermore, luminescent particles were also prepared by the wet impregnation of Eu(fod)3 complex and rhodamine-B molecules. Finally, tests of coating (core shell, SiO2 mesoporous-SiO2) of luminescent particles had been carried through and the The results obtained show spherical shape and the observation of a highly ordered hexagonal array of mesochannels further confirms the 2D hexagonal p6m structure. Luminescence results reveal that rhodamine-B has been successfully encapsulated into the channels of mesoporous particles. Silica coating has been observed in TEM measurements
Descrição
Palavras-chave
Química inorgânica, Luminescencia, Materiais mesoporosos, Inorganic chemistry, Luminescence, Mesoporous materials
Como citar
ROCHA, Lucas Alonso. Materiais meso-estruturados luminescentes. 2010. 161 f. Tese (doutorado) - Universidade Estadual Paulista, Instituto de Química, 2010.