• Avaliação do comportamento do cop de um sistema de condicionamento de ar, quando se varia o fluxo de refrigerante através de um sistema empregando inversor de frequência 

  Barbosa, Venilton de Camargo (Universidade Estadual Paulista (UNESP), 2017) [Trabalho de conclusão de curso]

  Energy efficiency has been an issue of fundamental importance, especially in the last 50 years. The two main benefits of using energy more efficiently are: economic, since the expenses with electric energy are significant ...

• Projeto de luminária LED para postos de combustível 

  Aoki, William Tadashi (Universidade Estadual Paulista (UNESP), 2017) [Trabalho de conclusão de curso]

  About 5 years ago, the trade in LED luminaires began in Brazil, most of which were imported from China. The LED lighting market has grown exponentially, allowing the technology to serve a variety of areas, including the ...

• Manutenção preditiva por análise de vibração mecânica em máquinas rotativas: estudo de caso 

  Galli, Vinícius Barcos (Universidade Estadual Paulista (UNESP), 2017) [Trabalho de conclusão de curso]

  The present work exposes the vibration monitoring as a maintenance strategy for rotating equipment, being one of the most used techniques by the predictive maintenance. The present work provides information about the main ...

• Projeto de uma máquina de queda livre de peso 

  Silva, Siranny Guillaumon Pereira da Silva (Universidade Estadual Paulista (UNESP), 2017) [Trabalho de conclusão de curso]

  Composite materials have been used in aeronautical applications and it is very important to know their main characteristics and properties. These materials present good results when submitted to tensile loads, but do not ...

• Utilização das ferramentas iLogic e iPart do autodesk inventor na confecção de conjuntos mecânicos 

  Mello, Victor Santos (Universidade Estadual Paulista (UNESP), 2017) [Trabalho de conclusão de curso]

  This work demonstrates in a didactic way the use of some specific software 3D modeling tools from Autodesk Inventor 2018. IPart and iLogic were used to perform customization and changes in the case study project, showing ...

• Implantação do indicador OEE (overall equipment effectiveness) em uma fábrica de autopeças 

  Simão, Sami Paiva (Universidade Estadual Paulista (UNESP), 2017) [Trabalho de conclusão de curso]

  The manufacturing industries have the need to maintain its competitiveness always in check with the market and their competitors, and one way to do it, is through the continuous improvement, cost reductions and increase ...

• Correção no apontamento de imagens da sonda cassini 

  Figueira, Rodrigo Teixeira (Universidade Estadual Paulista (UNESP), 2017) [Trabalho de conclusão de curso]

  In this work we present an IDL algorithm that calculates the parameters for the pointing correntions applied to images of the rings of Saturn taken by the Cassini spacecraft. SPICE routines are used to calculate the pixels ...

• Projeto preliminar de eixos e chavetas para sistemas de transmissão por engrenagens cilíndricas utilizando a linguagem VBA 

  Santos, Raphael Augusto de Oliveira (Universidade Estadual Paulista (UNESP), 2017) [Trabalho de conclusão de curso]

  Through a current and practical approach, this work aims to demonstrate the development of a programacional logic in Visual Basic for Application (VBA) language to calculate the initials values of shafts and square keys ...

• Termelétrica movida a conjunto a gás aeroderivado: análise técnica e econômica 

  Silva, Raphael Monacci Borges da (Universidade Estadual Paulista (UNESP), 2017) [Trabalho de conclusão de curso]

  Brazil is undergoing a reformulation of its electricity grid, with an increase in the share of plants that use renewable sources, and as a notable increase in thermoelectric plants. Aiming at this theme the present work ...

• Análise técnica e econômica da utilização de painel fotovoltaico para carregamento de bicicletas elétricas 

  Osório, Paula de Carvalho (Universidade Estadual Paulista (UNESP), 2016) [Trabalho de conclusão de curso]

  This work shows a study of electric bicycle type vehicle with different engine powers, 800W Chronos manufacturer, 500W from manufacturer Bull and 350W from manufacturer Dafra, in photovoltaic panel, in order to compare the ...

• Análise de compressores dinâmicos empregando modelagem CFD 

  Rossi, Pedro Paulo (Universidade Estadual Paulista (UNESP), 2017) [Trabalho de conclusão de curso]

  The present work come up with a study about a simplification of a centrifugal compressor, based on a Garrett M53-3 turbocharging device, used in the Renault M9R internal combustion engine, available in the CNAM Turbomachinery ...

• Deformações em elementos estruturais de materiais compósitos reforçados por fibras em software baseado em elementos finitos 

  Balieiro, Rafael Serpa Leite (Universidade Estadual Paulista (UNESP), 2017) [Trabalho de conclusão de curso]

  In this work was made a theoretical study on composite materials. Next, was made a didactic approach to create composites using the ANSYS software's ACP system. Simulations through the software have been proposed in order ...

• Estudo do indicador de disponibilidade da linha de produção de uma empresa de reciclagem 

  Balthazar, Priscila Aoki (Universidade Estadual Paulista (UNESP), 2017) [Trabalho de conclusão de curso]

  The availability of production resources is very important for manufacturing companies to remain competitive in the market. To manage the availability of resources, a Performance Measurement System is necessary for the ...

• Análise de variáveis macro e micro econômicas para formação de carteiras de investimentos aplicando a moderna teoria do portfólio 

  Almeida Junior, Osvaldo Pimenta de (Universidade Estadual Paulista (UNESP), 2017) [Trabalho de conclusão de curso]

  This paper aims to demonstrate the assembling of a portfolio of assets through the application of Modern Portfolio Theory proposed by Harry Markowitz. With the application of the mathematical principles proposed by Markowitz, ...

• Melhoria estrutural de um gerador de espuma móvel 

  Santos, Paola Fameli dos (Universidade Estadual Paulista (UNESP), 2017) [Trabalho de conclusão de curso]

  This study reports the study of some structural improvements in a mobile foam generator. The equipment is used in the hygine of contamined surfaces with the application of foam, being widely used in food and beverage ...

• Projeto estrutural de molas helicoidais de compressão utilizando o programa Microsoft Excel 

  Sousa, Nathan Major de (Universidade Estadual Paulista (UNESP), 2017) [Trabalho de conclusão de curso]

  The purpose of the work is to design a compression spring that will work on fatigue and its main purpose is to serve as a support material for undergraduates. The project will use the Excel \ VBA programming language, where ...

• Análise de custo e rugosidade em processo de retificação cilíndrica externa de mergulho de aço ABNT 8620 para diferentes tipos de rebolos 

  Camargo, Nicolas Santana (Universidade Estadual Paulista (UNESP), 2017) [Trabalho de conclusão de curso]

  Grinding is the most commonly used finishing process in current industry due to it is high productivity in large batches of parts that need to have low roughness and tight dimensional and geometrical tolerance. However, ...

• Influência da velocidade e posição de soldagem nas propriedades de juntas soldadas pelo processo de eletrodo revestido 

  Silva, Nicholas Michael Caesar Sene e (Universidade Estadual Paulista (UNESP), 2017) [Trabalho de conclusão de curso]

  Shielded metal arc welding is usually used in the metal-mechanical industry and, controlling microstructure as well as mechanical properties of a welded joint, based on welding parameters, is definitively important in ...

• Análise comparativa entre metodologias de otimização de portfólio 

  Caressato, Nathan José Lara (Universidade Estadual Paulista (UNESP), 2017) [Trabalho de conclusão de curso]

  Based on empirical observations of the investment profile of a Brazilian citizen, this paper aims to identify investment opportunities in the financial market, based on stocks, government bonds backed by the federal ...

• Aplicação do controle estatístico do processo no envase de líquido em saquinhos 

  Carvalho, Marlon do Vale (Universidade Estadual Paulista (UNESP), 2017) [Trabalho de conclusão de curso]

  In order to acquire products with a high quality, the statistical process control (SPC) offers significant advantages in its use, allowing an efficient evaluation of the process and a subsequent monitoring. Thus, this work ...

View more