Show simple item record

dc.contributor.authorBattistelle, Rosane [UNESP]
dc.contributor.authorViola, Natalia Martin [UNESP]
dc.contributor.authorBezerra, Barbara Stolte [UNESP]
dc.contributor.authorValarelli, Ivaldo De Domenico [UNESP]
dc.date.accessioned2015-03-18T15:56:08Z
dc.date.available2015-03-18T15:56:08Z
dc.date.issued2014-01-01
dc.identifierhttp://dx.doi.org/10.1590/S1517-70762014000100003
dc.identifier.citationMateria-rio De Janeiro. Rio De Janeiro Rj: Univ Fed Rio De Janeiro, Lab Hidrogenio, v. 19, n. 1, p. 7-15, 2014.
dc.identifier.issn1517-7076
dc.identifier.urihttp://hdl.handle.net/11449/117436
dc.description.abstractRecycled polymer matrix composites reinforced with wood flour can be a viable alternative for the replacement of wood and virgin polymers in materials used in floors, door frames, windows and external cladding. The objective of this research was to determine some physical and mechanical parameters of composite made with Pinus taeda and elliottii wood flour (WF) and recycled polypropylene (PP), without the use of compatibilizers or additives. The composites were separated into four traits, namely 100% PP, 90% PP with 10%, WF 80% PP with 20% WF and 70 % PP with 30% WF. The characterization of the composite followed the standards ASTM D-638-10, ASTM D256-00, ASTM D570 -98, ASTM D1238 -10 and ASTM G 155-05, it was also employed the surface analysis by scanning electron microscopy. The dimensional stability tests showed satisfactory results. Even the composite with a higher percentage of wood flour (30%) had a flow index of 10 MFI, considered compatible with that observed for PP (polypropylene) virgin by standard ASTM D 1238-10. The inclusion of wood flour (FM) afforded composites with good mechanical characteristics which can be applied in manufacture of different materials, specifically employed outdoors.en
dc.format.extent7-15
dc.language.isopor
dc.publisherUniv Fed Rio De Janeiro, Lab Hidrogenio
dc.relation.ispartofMateria-rio De Janeiro
dc.sourceWeb of Science
dc.subjectWood flouren
dc.subjectrecycle polypropyleneen
dc.subjectcompositesen
dc.subjectwaste recoveryen
dc.titlePhysical and mechanical characterization of a recycled polypropylene and wood flour without additivesen
dc.typeArtigo
dcterms.rightsHolderUniv Fed Rio De Janeiro, Lab Hidrogenio
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)
dc.description.affiliationUniv Estadual Paulista Julio de Mesquita Filho UN, FEB, Programa Posgrad Engn Prod, Sao Paulo, Brazil
dc.description.affiliationUnespUniv Estadual Paulista Julio de Mesquita Filho UN, FEB, Programa Posgrad Engn Prod, Sao Paulo, Brazil
dc.identifier.doi10.1590/S1517-70762014000100003
dc.identifier.wosWOS:000340432700003
dc.rights.accessRightsAcesso restrito
unesp.campusUniversidade Estadual Paulista (UNESP), Faculdade de Engenharia, Baurupt
dc.identifier.lattes9897620753143611
unesp.author.lattes9897620753143611
unesp.author.orcid0000-0002-8459-4664[3]
dc.relation.ispartofjcr0.340
dc.relation.ispartofsjr0,188
Localize o texto completo

Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record