Model updating of the non-linear vibrating structures through Volterra series and proper orthogonal decomposition

Nenhuma Miniatura disponível

Data

2012-01-01

Autores

Shiki, S. B. [UNESP]
Lopes Junior, V. [UNESP]
Silva, S. da [UNESP]

Título da Revista

ISSN da Revista

Título de Volume

Editor

Katholieke Univ Leuven, Dept Werktuigkunde

Resumo

Classical procedures for model updating in non-linear mechanical systems based on vibration data can fail because the common linear metrics are not sensitive for non-linear behavior caused by gaps, backlash, bolts, joints, materials, etc. Several strategies were proposed in the literature in order to allow a correct representative model of non-linear structures. The present paper evaluates the performance of two approaches based on different objective functions. The first one is a time domain methodology based on the proper orthogonal decomposition constructed from the output time histories. The second approach uses objective functions with multiples convolutions described by the first and second order discrete-time Volterra kernels. In order to discuss the results, a benchmark of a clamped-clamped beam with an pre-applied static load is simulated and updated using proper orthogonal decomposition and Volterra Series. The comparisons and discussions of the results show the practical applicability and drawbacks of both approaches.

Descrição

Palavras-chave

Como citar

Proceedings Of International Conference On Noise And Vibration Engineering (isma2012) / International Conference On Uncertainty In Structural Dynamics (usd2012). Heverlee: Katholieke Univ Leuven, Dept Werktuigkunde, p. 2199-2212, 2012.