Show simple item record

dc.contributor.authorAvila, Érica Dorigatti de [UNESP]
dc.contributor.authorMoraes, Fernanda de Matos [UNESP]
dc.contributor.authorCastanharo, Sabrina Maria [UNESP]
dc.contributor.authorDel´Acqua, Marcelo Antonialli
dc.contributor.authorMollo Júnior, Francisco de Assis [UNESP]
dc.date.accessioned2015-08-06T16:13:11Z
dc.date.available2015-08-06T16:13:11Z
dc.date.issued2014
dc.identifierhttp://www.joionline.org/doi/full/10.1563/AAID-JOI-D-12-00198?=
dc.identifier.citationThe Journal of Oral Implantology, v. 40, n. 6, p. 633-639, 2014.
dc.identifier.issn0160-6972
dc.identifier.urihttp://hdl.handle.net/11449/125811
dc.description.abstractBecause there is no consensus in the literature about the need for a splint between copings, the aim of this study was to evaluate, in vitro, the accuracy of 2 impression techniques for implant-supported prostheses. A master cast was fabricated with four parallel implant abutment analogs and a passive framework. Two groups with 5 casts each were formed: Group 1 (squared impression copings with no splint: S) and Group 2 (splinted squared impression copings, using metal drill burs and Pattern resin: SS). The impression material used was polyvinyl siloxane with open trays for standard preparation of the casts. For each cast, the framework was positioned, and a titanium screw was tightened with 10 N·cm torque in analog A, after which measurements of the abutment-framework interface gaps were performed at analogs C and D. This process was repeated for analog D. These measurements were analyzed using software. A one-way analysis of variance (ANOVA) with a confidence interval of 95% was used to analyze the data. Significant differences were detected between S and SS in relation to the master cast (P ≤ 0.05). The median values of the abutment-framework interface gaps were as follows: master cast: 39.64 μm; squared impression copings with no splint: 205.86 μm; splinted squared impression copings: 99.19 μm. Under the limitations of this study, the technique presented for Group 2 produces better results compared with the technique used for Group 1.en
dc.description.sponsorshipFundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
dc.format.extent633-639
dc.language.isoeng
dc.relation.ispartofThe Journal of Oral Implantology
dc.sourceCurrículo Lattes
dc.titleEffect of splinting in accuracy of two implants impression techniquesen
dc.typeArtigo
dc.contributor.institutionUniversidade Estadual Paulista (Unesp)
dc.contributor.institutionCentro Universitário de Araraquara (UNIARA)
dc.description.affiliationUnespUniversidade Estadual Paulista Júlio de Mesquita Filho, Departamento de Materiais Odontológicos e Prótese, Faculdade de Odontologia de Araraquara
dc.identifier.doi10.1563/AAID-JOI-D-12-00198
dc.rights.accessRightsAcesso restrito
dc.description.sponsorshipIdFAPESP: 2009/14882-0
unesp.campusUniversidade Estadual Paulista (Unesp), Faculdade de Odontologia, Araraquarapt
dc.identifier.lattes4432114051631854
dc.identifier.lattes8564043124954667
unesp.departmentMateriais Odontológicos e Prótesept
unesp.author.lattes4432114051631854
unesp.author.lattes8564043124954667
dc.relation.ispartofjcr1.212
dc.relation.ispartofsjr0,569
Localize o texto completo

Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record