Caracterização de materiais luminescentes nanoestruturados de composição ZnO em função do método de síntese através da incorporação de Mg
Carregando...
Data
2017-07-27
Autores
Oliveira, Rodrigo Cury de [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Estadual Paulista (Unesp)
Resumo
O óxido de zinco (ZnO) é um semicondutor de tipo n com um largo intervalo de banda proibida que é utilizado devido às suas excelentes propriedades de luminescência. Diferentes métodos de preparação de amostras, assim como a incorporação de átomos de magnésio, modifica a banda proibida do ZnO, alterando a intensidade da luminescência, sem grandes alterações em sua estrutura cristalina. Neste estudo, foram preparadas amostras nanoestruturadas de ZnO por três diferentes métodos de preparação (Precursores Poliméricos, Solvotermal e Co-precipitação) e amostras dopadas com diferentes quantidades de magnésio (Zn1-xMgxO). Os resultados de difração de raios-X mostram que as amostras de Zn1-xMgxO cristalizaram completamente sem a presença de fases secundárias (até 20% de magnésio) e os padrões de difração correspondem à estrutura espacial wurtzita hexagonal P63mc. Com o uso do Microscópio eletrônico de varredura comprovamos o aumento do tamanho das partículas relacionado com o aumento da temperatura de calcinação. Espectroscopia de Fotoluminescência exibe uma emissão na região do verde para amostras com magnésio. À medida que a concentração de Mg aumenta, observa-se um aumento desta emissão, o que está associado com o aumento das vacâncias de oxigênio em função da concentração de Mg. Esta técnica ainda mostrou uma emissão na região do laranja em ~ 600 nm para as amostras preparadas por co-precipitação e solvotermal, devido a defeitos do tipo Zn intersticial e a formação de Zn(OH)2 na superfície das nanopartículas de ZnO. A Espectroscopia de Absorção de Raios X (XANES e EXAFS) na borda k do zinco exibem a ocorrência de vacâncias de oxigênio e estas vacâncias podem estar relacionadas com a emissão na região do verde dos espectros de fotoluminescência para amostras de Zn1-xMgxO. Ainda, essas técnicas também confirmam que a incorporação de magnésio não gera grandes alterações na estrutura cristalina.
Zinc oxide (ZnO) is a n-type semiconductor with a large band gap which has received considerable attention because of its optical properties and technological applications. Different methods of sample preparation, as well as the incorporation of magnesium atoms, modify the ZnO band gap, changing the intensity of the luminescence, without major changes in its crystalline structure. In this study, nanostructured ZnO samples were prepared by three different preparation methods (polymeric precursors, solvotermal and co-precipitation) and with the incorporation of different amounts of magnesium (Zn1-xMgxO). The X-ray diffraction results show that Zn1-xMgxO samples crystallized completely without the presence of secondary phases (up to 20% of magnesium) and the diffraction patterns correspond to the hexagonal wurtzite structure with space group P63mc. The characterization by scanning electron microscopy showed that the prepared samples have nanometric dimensions and that the increase of the calcination temperature causes an increase in the particle size. Results obtained with photoluminescence spectroscopy show an emission centered in the green region for all samples, which is caused by defects in the crystalline structure associated with oxygen vacancies. As the concentration of Mg increases, an increase of this emission is observed. This technique also showed an emission in the orange region at ~ 600 nm for samples prepared by co-precipitation and solvotermal due to interstitial Zn-type defects and Zn(OH)2 formation on the surface of ZnO nanoparticles, whose existence is confirmed with Raman spectroscopy measurements. Results obtained with the X-ray absorption spectroscopy technique (XANES and EXAFS) at the Zn K-edge exhibit the occurrence of oxygen vacancies and these vacancies may be related to the emission in the green region of the photoluminescence spectra. Moreover, these techniques also confirm that the incorporation of magnesium does not generate great changes in the crystalline structure.
Zinc oxide (ZnO) is a n-type semiconductor with a large band gap which has received considerable attention because of its optical properties and technological applications. Different methods of sample preparation, as well as the incorporation of magnesium atoms, modify the ZnO band gap, changing the intensity of the luminescence, without major changes in its crystalline structure. In this study, nanostructured ZnO samples were prepared by three different preparation methods (polymeric precursors, solvotermal and co-precipitation) and with the incorporation of different amounts of magnesium (Zn1-xMgxO). The X-ray diffraction results show that Zn1-xMgxO samples crystallized completely without the presence of secondary phases (up to 20% of magnesium) and the diffraction patterns correspond to the hexagonal wurtzite structure with space group P63mc. The characterization by scanning electron microscopy showed that the prepared samples have nanometric dimensions and that the increase of the calcination temperature causes an increase in the particle size. Results obtained with photoluminescence spectroscopy show an emission centered in the green region for all samples, which is caused by defects in the crystalline structure associated with oxygen vacancies. As the concentration of Mg increases, an increase of this emission is observed. This technique also showed an emission in the orange region at ~ 600 nm for samples prepared by co-precipitation and solvotermal due to interstitial Zn-type defects and Zn(OH)2 formation on the surface of ZnO nanoparticles, whose existence is confirmed with Raman spectroscopy measurements. Results obtained with the X-ray absorption spectroscopy technique (XANES and EXAFS) at the Zn K-edge exhibit the occurrence of oxygen vacancies and these vacancies may be related to the emission in the green region of the photoluminescence spectra. Moreover, these techniques also confirm that the incorporation of magnesium does not generate great changes in the crystalline structure.
Descrição
Palavras-chave
Nanopartículas, ZnO, Difração de raios X, Fotoluminescência, Absorção de raios X para estruturas próximas a borda (XANES), Absorção estendida de raios X para estruturas finas (EXAFS), Nanoparticles, Zn1-xMgxO, X-ray diffraction, Photoluminescence, X-ray absorption, XANES, EXAFS, Raman