Influência do ângulo de preparação da junta no aço tubular AISI 4130 soldado pelo processo TIG

Carregando...
Imagem de Miniatura

Data

2018-02-28

Autores

Coelho, Fernando

Título da Revista

ISSN da Revista

Título de Volume

Editor

Universidade Estadual Paulista (Unesp)

Resumo

As indústrias metalúrgicas de diversos segmentos buscam continuamente aperfeiçoar seus processos e reduzir custos de produção de estruturas metálicas. Variações em um processo térmico padronizado ou na configuração do produto podem causar alterações na microestrutura e nas propriedades mecânicas do, bem como, no comportamento mecânico do material. Assim, o presente estudo avaliou os efeitos das variações do ângulo de chanfro da junta em tubos de aço redondos AISI 4130 sem costura, quando soldados no processo TIG (Tungsten Inert Gas). Os tubos foram cortados com arco de plasma e preparados com ângulos, 30°, 45° e 60°, e 1 milímetro de altura da raiz. A soldagem foi realizada em dois passes, sendo o primeiro passe na raiz pelo método autógeno e o segundo de preenchimento com metal de adição arame-eletrodo AWSER80S-B2. As juntas soldadas foram submetidas a análises metalográficas de macrografia e microscopia óptica, para avaliação metalúrgica das zonas fundida e afetada pelo calor. Também foi realizado ensaio mecânico de tração e microdureza Vickers para verificar o desempenho mecânico e a dureza do material. A variável de interesse do estudo foi evidenciada por meio da estabilização do processo de corte e soldagem com uso de uma máquina rotativa digital desenvolvida no presente estudo. Os resultados obtidos evidenciaram uniformidade entre os cordões produzidos, variações nas geometrias dos cordões, no tamanho de grão e nas fases de transformação da microestrutura, com impacto na dureza da ZF (Zona Fundida), assim como no desempenho mecânico verificado com ensaios de tração. Conclui-se que, variações no ângulo da junta alteram a área de contato do arco com a poça de fusão, assim como, da poça de fusão com a ZAC. Com isso têm-se diferentes eficiências de transferência de energia térmica por condução, com diferentes ciclos térmicos que resultam em fases e transformações metalúrgicas distintas.
The metallurgical industries at several segments are continuously looking for improving their process and decrease metallic structures production costs. Modifications in a standardized thermal process or in the product configuration can leads to microstructure changes and in the mechanical properties,as well, in the mechanical behavior from the material. Thus, the current study made an assessment of the angle variation effect in steel round tubes joint AISI 4130 without seam, when welded by mechanized TIG process (Tungsten Inert Gas). The steel tubes were cross cut with plasma and prepared in three different angles 30°, 45° and 60°, with 1 millimeter height of root. The welding was made in two passes, the first one in the root by autogenous methode and the second one for filling using eletrode wire AWS ER80S-B2. The welded joints were submitted to metallographic test of macrograph and optical micrographics for metalurgical assessment in the melted zone and the heat affected zone. In addiction was made traction tests and micro hardness Vickers for verify the mechanical behavior and hardness from the material. The interest variable in this study, was evidenced by cut and welding process stabilization using a digital rotative machine developed in this study. The obtained results showed uniformity between weld beads produced with variation in the geometry, as well, in the grain size and in the fases transformations from the microstructure, with impact in the melted zone hardness profile, and in the mechanical properties verified by traction test. It´s pissible conclude that joint chanfer angle variations cause changes in the contact area size between the arc and the molten puddle, and between the molten puddle with the base metal. With this, diferent energy transfer efficency by conduction are obtained producing diferent thermal cicle, that can result in diferent metallurgical fases and microstructure transformations.

Descrição

Palavras-chave

Tubo de aço AISI 4130, Corte com plasma, Soldagem TIG mecanizada, Análise metalográfica, Desempenho mecânico, Steel tube AISI 4130, Plasma cutting, Mechanized TIG welding, Metalographycal analisys, Mechanical properties

Como citar