RSS 1.0Artigos - Materiais Odontológicos e Prótese - FOAR
Browse by
Recent Submissions
-
Inactivation of SARS-CoV-2 by a chitosan/α-Ag2WO4 composite generated by femtosecond laser irradiation
; de Paula e Silva, Ana Carolina Alves
; da Silva Pimentel, Bruna Natália Alves ; Pinatti, Ivo Mateus ; Simões, Alexandre Zirpoli ; Vergani, Carlos Eduardo ; ; ; ; et al. (Scientific Reports, 2022) [Artigo]
In the current COVID-19 pandemic, the next generation of innovative materials with enhanced anti-SARS-CoV-2 activity is urgently needed to prevent the spread of this virus within the community. Herein, we report the synthesis ... -
Influence of Manganese Oxide on the Esthetic Efficacy and Toxicity Caused by Conventional In-office Tooth Bleaching Therapy
Ribeiro, Rao; de Oliveira Duque, C. C. ; Ortecho-Zuta, U. ; Leite, M. L. ; Hebling, J. ; ; (Operative dentistry, 2022) [Artigo]
OBJECTIVE: This study aimed to evaluate the esthetic efficacy, cytotoxicity, and kinetics of decomposition of hydrogen peroxide (H2O2) present in a commercial bleaching gel with 35% H2O2 (BG35%) chemically activated with ... -
Race for Applicable Antimicrobial Dental Implant Surfaces to Fight Biofilm-Related Disease: Advancing in Laboratorial Studies vs Stagnation in Clinical Application
De Avila, Erica D.; ; Pereira, Marta M. A. ; ; Pavarina, Ana Claudia ; (ACS Biomaterials Science and Engineering, 2022) [Resenha]
Across years, potential strategies to fight peri-implantitis have been notoriously explored through the antimicrobial coating implant surfaces capable of interfering with the bacterial adhesion process. However, although ... -
Industry support for dental implant research: A metatrend study of industry partnership in the development of new technologies
Pereira, Marta M.A.; ; ; ; de Avila, Erica D. (Journal of Prosthetic Dentistry, 2022) [Artigo]
Statement of problem: Industry needs scientific knowledge to develop new products and services, and their financial support to dental implant researchers translates into commercial products. Therefore, identifying the ... -
Tailoring Cu2+-loaded electrospun membranes with antibacterial ability for guided bone regeneration
; ; de Avila, Erica D.; ; ; (Biomaterials Advances, 2022) [Artigo]
Copper (Cu)-loaded electrospun membranes were tailored for guided bone regeneration (GBR), targeting the stimulation of innate cells active in bone growth and the prevention of bacterial infections. Functional GBR membranes ... -
Surface Engineering for Dental Implantology: Favoring Tissue Responses Along the Implant
; ; ; ; ; ; De Avila, Erica Dorigatti; (Tissue Engineering - Part A, 2022) [Resenha]
Dental implants represent an illustrative example of successful medical devices used in increasing numbers to aid (partly) edentulous patients. Particularly in spite of the percutaneous nature of dental implant systems, ... -
Evaluation of Shear Bond Strength Between Denture Teeth and 3D-Printed Denture Base Resin
Cleto, Marília P.; Silva, Marcela D. D. ; Nunes, Thaís S. B. S. ; Viotto, Hamile E. C. ; Coelho, Sabrina R. G. ; Pero, Ana C. (Journal of Prosthodontics, 2022) [Artigo]
Purpose: The aim of this study was to evaluate the bond strength between two types of artificial teeth with a 3D-printed denture base resin using different bonding agents. Materials and methods: Two types of artificial ... -
Strontium-loaded titanium-15molybdenum surface improves physicochemical and biological properties in vitro
Matos, Flávia Gomes; Santana, Luís Carlos Leal ; Cominotte, Mariana Aline ; ; Vaz, Luís Geraldo ; ; Cirelli, Joni Augusto (Biomedical Physics and Engineering Express, 2022) [Artigo]
The titanium alloy composition and microdesign affect the dynamic interplay between the bone cells and titanium surface in the osseointegration process. The current study aimed to evaluate the surface physicochemical ... -
Cellulose nanocrystals into Poly(ethyl methacrylate) used for dental application
Leite, Andressa; Viotto, Hamille ; Nunes, Thais ; ; Pero, Ana (Polimeros, 2022) [Artigo]
Cellulose nanocrystals (CNCs) can improve the mechanical properties of dental resins. However, there is a deficiency of information about the behavior of physical properties of resins after this addition. The purpose was ... -
Efficacy of curcumin-mediated antibacterial photodynamic therapy for oral antisepsis: A systematic review and network meta-analysis of randomized clinical trials
Ferrisse, Túlio Morandin; Dias, Luana Mendonça ; Oliveira, Analú Barros de ; Jordão, Claudia Carolina ; Mima, Ewerton Garcia de Oliveira ; Pavarina, Ana Cláudia (Photodiagnosis and Photodynamic Therapy, 2022) [Resenha]
Background: The presence of oral microorganisms resistant to traditional treatment is increasing, thus a search for new therapies is needed. In this context, antimicrobial photodynamic therapy (aPDT) is an approach for the ... -
Titanium alkalinization improves response of osteoblasts to zoledronic acid
; Pansani, Taisa Nogueira; Cardoso, Lais Medeiros ; Costa, Carlos Alberto de Souza ; (Biointerphases, 2022) [Artigo]
This investigation is aimed to determine the effect of the modification of titanium surface with NaOH on the metabolism of osteoblasts treated with zoledronic acid (ZA). Machined and NaOH-Treated titanium disks were used. ... -
Translation and cross-cultural adaptation of the Headache Screening Questionnaire into Brazilian Portuguese
; ; Gonçalves, Daniela Aparecida Godoi; ; ; ; Calixtre, Letícia Bojikian (Musculoskeletal Science and Practice, 2022) [Artigo]
Background: The Headache Screening Questionnaire (HSQ) was created and validated to enable health professionals to screen for migraine and tension-type headaches. Objectives: The objective of this study was to translate ... -
A Denture Use Model Associated with Candida spp. in Immunocompetent Male and Female Rats
Sakima, Vinicius Tatsuyuji; Vega-Chacón, Yuliana ; Cerri, Paulo Sergio ; ; ; Mima, Ewerton Garcia de Oliveira (Journal of Fungi, 2022) [Artigo]
Denture stomatitis (DS) is a common infection in denture wearers, especially women. This study evaluated the induction of DS using acrylic devices attached to the palate of rats combined with inoculation of Candida spp. ... -
Long-term effects of simulated gastrijuice alternated with brushing on hardness, substance loss, flexural strength and reliability of CAD-CAM monolithic materials
Oliveira, Jailson Junior Rodrigues; Cruz, Marlon Eduardo Menezes da ; Dovigo, Lívia Nordi ; Fonseca, Renata Garcia (Journal of Applied Oral Science, 2022) [Artigo]
Objectives: The purpose of this study is to evaluate, over a simulated 5-year period, the effect of simulated gastric juice alternated with brushing on CAD-CAM monolithic materials considering microhardness, substance loss, ... -
Pro-inflammatory mediators expression by pulp cells following tooth whitening on restored enamel surface
; ; ; Leite, Maria Luisa; Duque, Carla Caroline de Oliveira ; ; ; Hebling, Josimeri ; Costa, Carlos Alberto de Souza (Brazilian Dental Journal, 2022) [Artigo]
This paper aimed to assess the influence of adhesive restoration interface on the diffusion of hydrogen peroxide (H2O2), indirect toxicity, and pro- inflammatory mediators expression by odontoblast-like cells, after in-office ... -
Poly(caprolactone)-aligned nanofibers associated with fibronectin-loaded collagen hydrogel as a potent bioactive scaffold for cell-free regenerative endodontics
; Ribeiro, Rafael Antonio de Oliveira; ; Hebling, Josimeri ; (International Endodontic Journal, 2022) [Artigo]
Aim Guided tissue regeneration has been considered a promising strategy to replace conventional endodontic therapy of teeth with incomplete root formation. Therefore, the objective of this study was to develop a tubular ... -
Race for Applicable Antimicrobial Dental Implant Surfaces to Fight Biofilm-Related Disease: Advancing in Laboratorial Studies vs Stagnation in Clinical Application
Avila, Erica D. de; ; ; ; ; (Acs Biomaterials Science & Engineering, 2022) [Resenha]
Across years, potential strategies to fight peri-implantitis have been notoriously explored through the antimicrobial coating implant surfaces capable of interfering with the bacterial adhesion process. However, although ... -
Evaluation of Bulk Fill Composite Roughness Polished with Spiral Rubber Discs: An In-vitro Study
; Dias, Marlon Ferreira; ; ; ; ; ; (Journal Of Clinical And Diagnostic Research, 2022) [Artigo]
Introduction: Restorations with high surface roughness directly influences restorative procedure longevity. When used correctly, polishing systems optimizes the quality, aesthetics and longevity of composite resins. Aim: ... -
Comparison of Two Home-based Chemically-induced Teeth Whitening in Adults: A Randomised Clinical Trial
; ; ; Dias, Marlon Ferreira; ; ; (Journal Of Clinical And Diagnostic Research, 2022) [Artigo]
Introduction: Whitening strips are one of the Over The Counter (OTC) bleaching products which performed tooth whitening through an easy-to-use, low-cost product with good esthetic results. Aim: To compare the bleaching ... -
A randomised crossover clinical trial of masticatory function in complete denture wearers with conventional and lingualised balanced occlusion
Pereira, Rodrigo de Paula; Rocha, Cibele Oliveira de Melo ; Jabr, Camila Luiz ; Oliveira, Lucas Portela ; Arioli Filho, João Neudenir (Gerodontology, 2021) [Artigo]
Objectives: The purposes of the present study were as follows: (1) to conduct a randomised crossover clinical trial to evaluate masticatory performance in wearers of conventional complete dentures in both arcs with ...