Show simple item record

dc.contributor.authorHeck, Stenio Cristaldo
dc.contributor.authorNeto, Amadeu Lombardi
dc.contributor.authorPicon, Carlos Alberto [UNESP]
dc.contributor.authorTotten, George Edward
dc.contributor.authorCasteletti, Luiz Carlos
dc.date.accessioned2018-12-11T16:44:54Z
dc.date.available2018-12-11T16:44:54Z
dc.date.issued2015-01-01
dc.identifier.citationEuropean Conference on Heat Treatment 2015 and 22nd IFHTSE Congress - Heat Treatment and Surface Engineering from Tradition to Innovation.
dc.identifier.urihttp://hdl.handle.net/11449/169205
dc.description.abstractIn this work the effect of pack boriding time and temperature on the wear and corrosion resistance of AISI H13 tool steel was investigated. Steel samples were pack borided at 900 and 1000°C for periods of 2 and 4h; followed by non-abrasive fixed-ball microwear tests on borided and non-borided samples. The corrosion resistance was evaluated by potentiodynamic polarization tests in HCl 0.1M. High hardness layers were formed on the samples for all treatment conditions employed. The layer's properties, such as hardness, thickness, layer/substrate interface morphology and phases formed, were influenced by steel composition. For AISI H13 steel, which has a larger amount of alloying elements than carbon steel, the formed layers were harder, thinner, with a smoother interface. For all treatment conditions, the presence of Fe2B, FeB and CrB were identified. The wear and corrosion resistance of borided samples was significantly increased. The best results were obtained for samples borided at 1000°C.en
dc.description.sponsorshipConselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
dc.language.isoeng
dc.relation.ispartofEuropean Conference on Heat Treatment 2015 and 22nd IFHTSE Congress - Heat Treatment and Surface Engineering from Tradition to Innovation
dc.sourceScopus
dc.subjectAISI H13
dc.subjectBoriding
dc.subjectCorrosion
dc.subjectPack boriding
dc.subjectWear
dc.titleInfluence of pack boriding on the wear and corrosion resistance of AISI H13 steelen
dc.typeTrabalho apresentado em evento
dc.contributor.institutionUniversidade de São Paulo (USP)
dc.contributor.institutionUTFPR-LD
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)
dc.contributor.institutionPortland State University
dc.description.affiliationEESC University of São Paulo - USP
dc.description.affiliationUTFPR-LD
dc.description.affiliationEEIS-UNESP
dc.description.affiliationPortland State University
dc.description.affiliationEESC Universidade de São Paulo - USP
dc.description.affiliationUnespEEIS-UNESP
dc.rights.accessRightsAcesso aberto
dc.description.sponsorshipIdCNPq: 305789/2012-0
dc.identifier.scopus2-s2.0-85003441339
unesp.author.lattes0346141862450103[3]
unesp.author.orcid0000-0002-7701-1360[3]
Localize o texto completo

Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record