Effects of negatively and positively charged Ti metal surfaces on ceramic coating adhesion and cell response

Carregando...
Imagem de Miniatura

Data

2017-02-01

Autores

do Nascimento, Rodney Marcelo [UNESP]
de Carvalho, Vanessa Rafaela [UNESP]
Govone, Jos� Silvio [UNESP]
Hernandes, Ant�nio Carlos
da Cruz, Nilson Cristino [UNESP]

Título da Revista

ISSN da Revista

Título de Volume

Editor

Resumo

Abstract: This manuscript reports an evaluation of the effects of simple chemical-heat treatments on the deposition of different ceramic coatings, i.e., TiO2, CaTiO3 and CaP, on commercially pure titanium (cp-Ti) and Ti6Al4V and the influence of the coatings on cells interaction with the surfaces. The ceramic materials were prepared by the sol-gel method and the coating adhesion was analyzed by pull-off bending tests. The wettability of positively or negatively charged surfaces was characterized by contact angle measurements, which also enabled the calculation of the surface free energy through the polar-apolar liquids approach. Both acid and alkaline treatments activated the cp-Ti, whereas Ti6Al4V was only activated by the alkaline treatment. Such treatment led to increased hydrophilicity with inhibition of the fibroblastic response on Ti6Al4V. On the other hand, osteoblastic cells adhered to and proliferated on the positively and negatively charged surfaces. The maximum adhesion strength (~ 3400 N) was obtained with a negative Ti6Al4V-CaTiO3-CaP multilayer surface. Graphical Abstract: [InlineMediaObject not available: see fulltext.]

Descrição

Palavras-chave

Como citar

Journal of Materials Science: Materials in Medicine, v. 28, n. 2, 2017.

Coleções