Show simple item record

dc.contributor.authorSilva De Freitas, Everaldo [UNESP]
dc.contributor.authorGuimarães Baptista, Fabricio [UNESP]
dc.date.accessioned2018-12-11T16:59:59Z
dc.date.available2018-12-11T16:59:59Z
dc.date.issued2016-02-01
dc.identifierhttp://dx.doi.org/10.1016/j.sna.2015.11.031
dc.identifier.citationSensors and Actuators, A: Physical, v. 238, p. 220-228.
dc.identifier.issn0924-4247
dc.identifier.urihttp://hdl.handle.net/11449/172379
dc.description.abstractStructural health monitoring (SHM) systems with damage detection based on the electromechanical impedance (EMI) method have received attention in recent decades because of the simplicity of the methodology, which is based on the use of small and lightweight piezoelectric transducers that operate simultaneously as sensors and actuators. Typically, the piezoelectric transducers used in the EMI method have been thin PZT (lead zirconate titanate) ceramics, which can be cut into different sizes and shapes. In this study, an experimental analysis of the feasibility of low-cost piezoelectric diaphragms, commonly known as buzzers, for damage detection based on the EMI method is presented. Diaphragms of different sizes were evaluated in aluminum beams, and the experimental results were compared with those obtained from a conventional PZT ceramic. Four types of experiments were performed: sensitivity estimation using the pencil lead break (PLB) method, analysis of the ability to detect structural damage using conventional impedance signatures and damage indices, analysis of temperature effects, and determination of the long-term reproducibility of the results. The results indicate that a conventional PZT ceramic and a diaphragm of similar size have similar reproducibilities and sensitivities to damage and temperature effects.en
dc.format.extent220-228
dc.language.isoeng
dc.relation.ispartofSensors and Actuators, A: Physical
dc.sourceScopus
dc.subjectDamage detection
dc.subjectFeasibility
dc.subjectImpedance
dc.subjectPiezoelectric diaphragms
dc.subjectPZT
dc.subjectSHM
dc.titleExperimental analysis of the feasibility of low-cost piezoelectric diaphragms in impedance-based SHM applicationsen
dc.typeArtigo
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)
dc.contributor.institutionUnilins
dc.description.affiliationFaculdade de Engenharia UNESP - Univ Estadual Paulista Campus de Bauru Departamento de Engenharia Elétrica
dc.description.affiliationCentro Universitário de Lins Unilins Departamento de Engenharia Elétrica e Automação
dc.description.affiliationUnespFaculdade de Engenharia UNESP - Univ Estadual Paulista Campus de Bauru Departamento de Engenharia Elétrica
dc.identifier.doi10.1016/j.sna.2015.11.031
dc.rights.accessRightsAcesso aberto
dc.identifier.scopus2-s2.0-84952912390
dc.identifier.file2-s2.0-84952912390.pdf
unesp.author.orcid0000-0002-1200-4354[2]
dc.relation.ispartofsjr0,699
Localize o texto completo

Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record