Corrosion characteristics of cold gas spray coatings of reinforced aluminum deposited onto carbon steel
Carregando...
Arquivos
Data
2017-01-01
Autores
Silva, F.S.da [UNESP]
Bedoya, J.
Dosta, S.
Cinca, N.
Cano, I. G.
Guilemany, J. M.
Benedetti, A. V. [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
The morphology, chemical, mechanical and corrosion characterization of starting materials, and Al and Al-Al2O3/Al coatings obtained by Cold Gas Spray and applied on common steel substrate were performed. An Al coating on a ground or grit blasted substrate, and Al-Al2O3/Al coating on ground mild carbon steel have been compared. The electrochemical results showed that the coatings protect the substrate for immersion times >2000 h due to the dense structure obtained by Al and Al-Al2O3. The electrolyte reaches the substrate only after 2000 h of immersion without wetting completely the coating/substrate interface. Coatings have resisted 3000 h of salt fog test.
Descrição
Palavras-chave
Aluminum, EIS, Metal coatings, Polarization, SEM, XRD
Como citar
Corrosion Science, v. 114, p. 57-71.