Show simple item record

dc.contributor.authorBertolini, Marilia Da Silva [UNESP]
dc.contributor.authorGalvaõ De Morais, César Augusto [UNESP]
dc.contributor.authorLahr, Francisco Antônio Rocco
dc.contributor.authorFreire, Rodrigo Teixeira Santos
dc.contributor.authorPanzera, Túlio Hallak
dc.contributor.authorChristoforo, André Luis
dc.identifier.citationJournal of Materials in Civil Engineering, v. 31, n. 11, 2019.
dc.description.abstractThis work evaluated the use of Pinus sp. wastes treated with a chromium, copper and boron compound (CCB), a wood preservative, to fabricate particleboards based on castor oil-polyurethane resin. The effects of wood particle content, resin mass fraction, pressing time, and their interactions on the physical (thickness swelling, moisture content, water absorption, and density) and mechanical properties (internal bond, and edge and face screw-holding capacity) were evaluated via full factorial design and ANOVA. Two experimental conditions resulted in mechanical properties which meet or surpass the standard requirements and were therefore selected for porosimetric and microscopic analyses. Retention of CCB active ingredients was determined (for particles and particleboards) in order to evaluate possible volatilization during manufacture. The results showed that after a 7.7% increase in wood particle content, the thickness swelling after 2 h decreased by 16.5% and water absorption after 2 h (24 h) decreased by 17.4% (25.3%). In contrast, the moisture content increased by 5.9%. On the other hand, the 25% increase in resin mass fraction resulted in 22.1% and 19% reductions in thickness swelling after 2 and 24 h, respectively. Water absorption after 24 h also decreased by 20.7%. In contrast, internal bond increased by 13.8% with a 25% increase in resin mass fraction. The interaction of factors was not significant for the studied properties. In particular, the factors considered did not significantly affect the screw-holding capacity response. The decrease in active ingredients of the preservative was linked to mass balance by taking into consideration the amount of resin in the composition of the panels.en
dc.relation.ispartofJournal of Materials in Civil Engineering
dc.subjectCastor oil-based polyurethane adhesive
dc.subjectPhysico-mechanical properties
dc.subjectTreated-wood wastes
dc.titleParticleboards from CCB-Treated Pinus sp. Wastes and Castor Oil Resin: Morphology Analyses and Physical-Mechanical Propertiesen
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)
dc.contributor.institutionSaõ Carlos
dc.contributor.institutionFederal Univ. of Saõ Joaõ Del Rei
dc.contributor.institutionUniversidade Federal de São Carlos (UFSCar)
dc.description.affiliationDept. of Production Engineering Saõ Paulo State Univ. (Unesp), Campus of Itapeva, Itapeva
dc.description.affiliationWood and Timber Structures Laboratory Dept. of Structural Engineering Saõ Carlos School of Engineering Univ. of Saõ Paulo Saõ Carlos
dc.description.affiliationCentre for Innovation and Technology in Composite Materials Dept. of Natural Sciences Federal Univ. of Saõ Joaõ Del Rei
dc.description.affiliationCentre for Innovation and Technology in Composite Materials Dept. of Mechanical Engineering Federal Univ. of Saõ Joaõ Del Rei
dc.description.affiliationDept. of Civil Engineering Federal Univ. of Saõ Carlos (UFSCar)
dc.description.affiliationUnespDept. of Production Engineering Saõ Paulo State Univ. (Unesp), Campus of Itapeva, Itapeva
dc.rights.accessRightsAcesso restrito
Localize o texto completo

Files in this item


There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record