Impact of simulated toothbrushing on surface properties of chairside CAD-CAM materials: An in vitro study
Abstract
Statement of problem: Chairside computer-aided design and computer-aided manufacturing (CAD-CAM) materials that do not require any firing steps are a promising option to expedite restoration production; however, little information is available to determine the most suitable material for each clinical situation. Purpose: The purpose of this in vitro study was to evaluate the effect of simulated toothbrushing on surface gloss, roughness, and wear of chairside CAD-CAM materials. Material and methods: Disk-shaped specimens (n=15) were prepared of the following materials: ENA—VITA Enamic; LAV—Lava Ultimate; EMP—IPS Empress CAD; CER—Cerasmart; GRA—Grandio blocs. Gloss (Gloss Unit—GU) and surface roughness (Ra—μm) were evaluated before and after simulated toothbrushing (100 000 strokes). Wear (μm) was assessed by contact profilometry. Additional analyses of microhardness by scanning electron microscopy were also performed. Data were analyzed with 2-way repeated measures ANOVA test for roughness and gloss, and 1-way ANOVA for wear (α=.05). To estimate the correlation between Ra and GU, the Pearson correlation was calculated. Results: Before brushing, CER showed the lowest Ra (P<.001), and GRA the lowest GU values. After brushing, the feldspathic ceramic-based materials (ENA and EMP) presented the highest gloss, whereas the ceramic group (EMP) showed the lowest Ra. Before and after brushing, GRA showed the lowest GU values. Higher wear values were found for the composite resin groups (CER>GRA), with the exception of LAVA, which was similar to ENA, and EMP showing improved wear resistance. A strong negative correlation (-0.925) between GU and Ra values was detected (P<.001). Conclusions: The materials containing a glass phase (ENA and EMP) presented higher wear resistance, higher gloss, and lower roughness after brushing than the other materials tested. The correlation test showed that the higher the surface roughness, the lower the gloss.
How to cite this document
Language
Sponsor
Grant number
Collections

Related items
Showing items related by title, author, creator and subject.
-
Núcleos de Ensino da Unesp: artigos 2009
Pinho, Sheila Zambello de; Oliveira, José Brás Barreto de
; Gazola, Rodrigo José Cristiano
; Mazotti, Adriano César
; Molero, Camila Schimite
; Mendes, Carolina Borghi
; Mello, Denise Fernandes de
; Marques, Emilia de Mendonça Rosa
; Talamoni, Jandira Liria Biscalquini
; Silva, José Humberto Dias da
et al. (Coleção PROGRAD (UNESP), 2011) [Livro]
-
Núcleos de Ensino da Unesp: artigos 2008
Pinho, Sheila Zambello de; Oliveira, José Brás Barreto de
; Pontes, Sueli Rodrigues
; Almeida, Djanira Soares de Oliveira e
; Godoy, Kathya Maria Ayres de
; Rosa, Claudia de Souza
; Nunes, Julianus Araújo
; Salvador, Sérgio Azevedo
; David, Célia Maria
; Vilche Peña, Angel Fidel
et al. (Coleção PROGRAD (UNESP), 2011) [Livro]
-
Ser e tornar-se professor: práticas educativas no contexto escolar
Pinho, Sheila Zambello de; Spazziani, Maria de Lourdes
; Mendonça, Sueli Guadelupe de Lima
; Rubo, Elisabete Aparecida Andrello
; Villarreal, Dalva Maria de Oliveira
; Duarte, Camila
; Okamoto, Mary Yoko
; Souza, Thais R.
; Garms, Gilza Maria Zauhy
; Marin, Fátima Aparecida Dias Gomes
et al. (Coleção PROGRAD (UNESP), 2012) [Livro]