Wear evaluation of an AISI 1020 steel coated with PEEK
Nenhuma Miniatura disponível
Data
2010-12-01
Autores
Pereira, Ricardo Gomes
Fernandes, Frederico Augusto Pires
Sirbone, Fabio Renato Camargo
De Oliveira Santos Neto, Antídio
Casteletti, Luiz Carlos [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
PEEK (Poly-ether-ether-ketone) coatings have been attracted interest from some industry sectors due to its good wear resistance. In this study the wear resistance of a AISI 1020 steel coated with PEEK it was compared with that the AISI 52100 steel quenched and tempered to a hardness of 60HRc. The wear tests were performed in a fixed-ball micro-wear machine, using three different loads in the dry condition and using a lubricant. It was found that the PEEK coating presented a better wear performance than the AISI 52100 steel in dry condition and a wear performance close to the lubricated AISI 52100 steel while the PEEK layer maintains its integrity. In the case of the lubricated tests, the AISI 52100 steel provided the best performance among the samples tested. Copyright © (2010) by Associação Brasileira de Metalurgia Materiais e Mineração (ABM).
Descrição
Palavras-chave
Coating, PEEK (poly-ether-ether-ketone), Wear
Como citar
65th ABM International Congress, 18th IFHTSE Congress and 1st TMS/ABM International Materials Congress 2010, v. 5, p. 4457-4462.