Dissolution of Chalcopyrite in Presence of Chelating Agent and Hydrogen Peroxide
Nenhuma Miniatura disponível
Data
2022-01-01
Autores
Turan, M. Deniz
Silva, J. Pedro [UNESP]
Sarı, Z. Abidin
Nadirov, Rashid
Toro, Norman
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
Chelating agents (e.g., EDTA, titriplex III, etc.) are very important salts as they can take a complex form with metal ions. This study investigated usage of titriplex III in presence of hydrogen peroxide for metal extraction from chalcopyrite concentrate under various conditions such as conventional leaching, mechanical activation and ultrasound leaching. The results show that both titriplex and hydrogen peroxide are required for metal extraction from chalcopyrite concentrate. However, mechanical activation is an important parameter for increasing metal extraction, so that copper extraction increases to 83% from 47% after 30 min of grinding chalcopyrite by a high-energy grinding system. Metal extraction efficiency is improved by application of ultrasound to the leaching process. It is possible to obtain copper and iron extraction as 93% and 65%, respectively, under the following leaching conditions: mechanical activation time of 30 min, titriplex concentration of 100 g L−1, H2O2 concentration of 2 mol L−1, ultrasound power of 10%, leaching time of 90 min, leaching temperature of 45 °C and liquid–solid ratio of 25 mL g−1.
Descrição
Palavras-chave
Chelating, Copper, Hydrogen peroxide, Leaching, Mechanical activation, Titriplex III, Ultrasound
Como citar
Transactions of the Indian Institute of Metals, v. 75, n. 1, p. 273-280, 2022.