Characterization of oxide coating grown by plasma electrolytic oxidation (PEO) at different times on aluminum alloy AA2024-T3
Nenhuma Miniatura disponível
Data
2022-01-01
Autores
Lucas, Rafael R. [UNESP]
Mota, Rogério P. [UNESP]
Abrahão, Ana B. R. M.
Botelho, Edson C. [UNESP]
Sales-Contini, Rita C. M.
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
Plasma oxide coatings have superior physical and chemical properties than films generated by conventional anodizing, besides only required a few seconds procedures and using environmentally friendly electrolytes. In this work, an experimental system was used to generate oxide films in substrates of aluminum alloy (AA2024-T3), varying treatment time in an alkaline solution. SEM/EDS characterizations were performed; also, other tests as profilometry; Eddy Current; XRD and ATR-FTIR. In the coating generated by 210 s, the morphology presented better uniformity and thickness of 1.3 μm. By XRD analysis, peaks related to Al, ɣ-Al2O3, mullite and amorphous phases. The main functional groups detected in the films were O–H, C=O, and bands related to alumina. Graphical abstract: [Figure not available: see fulltext.]
Descrição
Palavras-chave
Al, Coating, Oxide, Plasma deposition, Thin film
Como citar
MRS Communications.