Show simple item record

dc.contributor.authorPeres, M. P.
dc.contributor.authorSouza, R. C.
dc.contributor.authorPigatin, W. L.
dc.contributor.authorVoorwald, HJC
dc.identifier.citationFatigue Design 1998, Vol I. Espoo: Technical Research Centre Finland, v. 181, p. 343-349, 1998.
dc.description.abstractBending fatigue tests were carried out to clarify the effects of heat treatment parameters: temperature and time after cadmium electroplating on a high strength steel, to avoid hydrogen embrittlement. Temperatures heat of 190 degrees C, 230 degrees C, 250 degrees C and 300 degrees C at 3, 8 and 24 hours together with the base material electroplated, with and without heat treatment, resulted in 14 conditions studied with respect to fatigue behaviour. Statistical data analysis was performed to identify the best combination temperature/time regarding fatigue strength of the ABNT 4340 steel and the results obtained revealed that the fatigue strength depend on temperature/time conditions.en
dc.publisherTechnical Research Centre Finland
dc.relation.ispartofFatigue Design 1998, Vol I
dc.sourceWeb of Science
dc.subject4340 steelpt
dc.subjectcadmium electroplatingpt
dc.subjectbending fatigue testspt
dc.subjectheat treatmentpt
dc.titleAnalyses of fatigue data in 4340 high strength steel after cadmium electroplatingen
dc.typeTrabalho apresentado em evento
dcterms.rightsHolderTechnical Research Centre Finland
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)
dc.description.affiliationUNESP, FEG, BR-12500000 Guaratingueta, SP, Brazil
dc.description.affiliationUnespUNESP, FEG, BR-12500000 Guaratingueta, SP, Brazil
dc.rights.accessRightsAcesso aberto
Localize o texto completo

Files in this item


There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record