IEEE 1451-based multi-interface module (I2M) for industrial processes automation

Nenhuma Miniatura disponível

Data

2008-01-01

Autores

Batista, Edson A. [UNESP]
Silva, Alexandre C. R. [UNESP]
Gonda, Luciano
Pereira, Mauro C. [UNESP]
da Silva, Isaias
Ferreira, Wanderlei M.
D'Elia, Fabio

Título da Revista

ISSN da Revista

Título de Volume

Editor

IEEE

Resumo

This paper describes the implementation of a multi-interface module (I2M) for automation of industrial processes, based on the IEEE1451 standard. Process automation with I2M can communicate through either wires or using wireless communication, without any hardware or software changes. We used FPGA resources to implement the I2M functions FPGA, with a NIOS II processor and ZigBee communication system (IEEE802.15), as well as RS232 serial standard. Part of the project was done in the SOPC Builder environment, which gave the designer flexibility and speed to implement the NIOS II-based microprocessor system. To test the I2M implementation, a didactic Industrial Hydraulic Module (MHI-01) was used to simulate two industrial processes to be controlled by the system proposed.

Descrição

Palavras-chave

FPGA, NIOS, RS232, SOPC, ZigBee

Como citar

2008 IEEE Sensors Applications Symposium. New York: IEEE, p. 220-224, 2008.

Coleções