Analysis and design of constant-frequency peak-current-controlled high-power-factor boost rectifier with slope compensation
Data de publicação1996-01-01
Direito de acesso
MetadadosExibir registro completo
This paper presents the analysis and the design of a peak-current-controlled high-power-factor boost rectifier, with slope compensation, operating at constant frequency. The input current shaping is achieved, with continuous inductor current mode, with no multiplier to generate a current reference. The resulting overall circuitry is very simple, in comparison with the average-current-controlled boost rectifier. Experimental results are presented, taken from a laboratory prototype rated at 370 W and operating at 67 kHz. The measured power factor was 0.99, with a input current THD equal to 5.6%, for an input voltage THD equal to 2.26%.
Como citar este documento
Este item aparece nas seguintes coleções
Exibindo os itens relacionados pelo título, autor e palavra-chave.
Gonçalves, Flávio A. S. ; Canesin, Carlos A. ; Melo, Guilherme A. ; De Freitas, Luiz C. G. (2009 Brazilian Power Electronics Conference, COBEP2009, 2009) [Trabalho apresentado em evento]This paper deals with results of a research and development (R&D) project in cooperation with Electric Power Distribution Company in São Paulo (Brazil) regarding the development and experimental analysis of a new concept ...
Melo, G. A. ; Gonçalves, F. A S ; Oliveira, R. N. ; Muno, J. M.; Santos, M.; Canesin, C. A. (SPEEDAM 2010 - International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2010) [Trabalho apresentado em evento]This paper presents the development and experimental analysis of a special input stage converter for a Trolleybus type vehicle allowing its operation in AC (two wires, single-phase) or DC distribution networks. The ...
Distributed generation modelling for unbalanced three-phase power flow calculations in smart grids Gallego, Luis A. ; Carreno, Edgar; Padilha-Feltrin, Antonio (2010 IEEE/PES Transmission and Distribution Conference and Exposition: Latin America, T and D-LA 2010, 2011) [Trabalho apresentado em evento]Distributed Generators (DG) are generally modeled as PQ or PV buses in power flow studies. But in order to integrate DG units into the distribution systems and control the reactive power injection it is necessary to know ...