Microstructure, crystalline phase, and dielectric property analyses of TiO2 composition with ZrO2 addition
MetadataShow full item record
For microwave applications, including mobile and satellite communications, ceramic resonators should have a high dielectric constant, low dielectric losses, and high frequency stability. In this sense, TiO2-ZrO 2 ceramics have been investigated as a function of sintering behavior, phase composition, and microstructure. The ceramics were densified reaching a value of about 86% of theoretical density at 1400°C sintering temperature. The ceramics are prepared by mixing raw materials with the following TiO2-ZrO2 weight % ratio: 100 to 0, 90 to 10, and 80 to 20, respectively. The measured dielectric constants are between 79 and 88 values, while the quality factor due to dielectric losses are between 2820 and 5170. These results point out the influence of Ti/Zr ratio on controlling the dielectric properties. © (2010) Trans Tech Publications.
How to cite this document
Showing items related by title, author, creator and subject.
Dielectric behavior of epoxy/BaTiO3 composites using nanostructured ceramic fibers obtained by electrospinning Ávila, H. A.; Ramajo, L. A.; Góes, M. S. ; Reboredo, M. M.; Castro, M. S.; Parra, R. (ACS Applied Materials and Interfaces, 2013) [Artigo]Composite materials made of epoxy resin and barium titanate (BT) electrospun nanostructured fibers were prepared. BT fibers were synthesized from a sol based on barium acetate, titanium isopropoxide, and poly(vinyl ...
Ribeiro, Willian C. ; Joanni, Ednan ; Savu, Raluca ; Bueno, Paulo Roberto (Solid State Communications, 2011) [Artigo]In the present communication, by using dielectric spectroscopy measurement, the correlations between Nanosized Barrier Layer Capacitance (NBLC) (Bueno et al. (2009) ) and the high frequency polaronic near-Debye dipolar ...
Ramajo, Leandro Alfredo; Ramírez, Miguel Angel ; Bueno, Paulo Roberto ; Reboredo, María Marta; Castro, Miriam Susana (Materials Research, 2008) [Artigo]The dielectric behavior of composite materials (epoxy resin - barium titanate and epoxy - CCTO) was analysed as a function of ceramic amount. Composites were prepared by mixing the components and pouring them into suitable ...