Show simple item record

dc.contributor.authorSantos Neto, Antídio de Oliveira [UNESP]
dc.contributor.authorMancini, Sandro Donnini [UNESP]
dc.contributor.authorSirbone, Fábio Renato Camargo
dc.date.accessioned2014-05-27T11:29:01Z
dc.date.available2014-05-27T11:29:01Z
dc.date.issued2013-05-01
dc.identifierhttp://dx.doi.org/10.1016/j.jclepro.2012.09.019
dc.identifier.citationJournal of Cleaner Production, v. 46, p. 36-41.
dc.identifier.issn0959-6526
dc.identifier.urihttp://hdl.handle.net/11449/75221
dc.description.abstractThe substitution of steel as a raw material in the production of axial pistons for pressure washers by polyphthalamide, polytetrafluoroethylene and glass fiber-based composite was studied. The new production process with composite consists of only two steps, while the production of the steel piston is to comprise of thirteen steps. This replacement would result in an estimated reduction of 80% of water consumption, 83% of electricity consumption, 73% of the total cost and 88% of the final mass. With regard to the main mechanical properties required for the end product, the composite was found to withstand the critical axial loads and it shows acceptable wear resistance in an environment without lubrication, an additional advantage of this replacement. © 2012 Elsevier Ltd. All rights reserved.en
dc.format.extent36-41
dc.language.isoeng
dc.relation.ispartofJournal of Cleaner Production
dc.sourceScopus
dc.subjectComposite
dc.subjectConsumption reduction
dc.subjectPolyphthalamide
dc.subjectSteel
dc.subjectSubstitution of material
dc.subjectConsumption reductions
dc.subjectElectricity-consumption
dc.subjectNew production
dc.subjectPolymer-based materials
dc.subjectPressure washer
dc.subjectSteel pistons
dc.subjectWater consumption
dc.subjectComposite materials
dc.subjectWater supply
dc.subjectWear resistance
dc.subjectComposites
dc.subjectGlass Fibers
dc.subjectPistons
dc.subjectPolymers
dc.subjectPolytetrafluoroethylene
dc.subjectWater Supply
dc.titleProduction of an axial piston: Impacts resulting from the substitution of steel by a polymer-based materialen
dc.typeArtigo
dcterms.licensehttp://www.elsevier.com/about/open-access/open-access-policies/article-posting-policy
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)
dc.contributor.institutionSchaeffler Group
dc.description.affiliationUNESP - Univ. Estadual Paulista Campus Experimental de Sorocaba, Av. 3 de Março, 511 - Alto da Boa Vista, 18087-180 Sorocaba, SP
dc.description.affiliationSchaeffler Group, Av. Independência, 3500A, 18087-101 Sorocaba, SP
dc.description.affiliationUnespUNESP - Univ. Estadual Paulista Campus Experimental de Sorocaba, Av. 3 de Março, 511 - Alto da Boa Vista, 18087-180 Sorocaba, SP
dc.identifier.doi10.1016/j.jclepro.2012.09.019
dc.identifier.wosWOS:000319104200005
dc.rights.accessRightsAcesso restrito
dc.identifier.scopus2-s2.0-84879798558
dc.identifier.orcid0000-0002-4287-1969
unesp.author.orcid0000-0002-4287-1969[2]
dc.relation.ispartofjcr5.651
dc.relation.ispartofsjr1,467
Localize o texto completo

Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record