Now showing items 1-10 of 50
Grinding of hardened steels using optimized cooling
(Ingeniare, 2008-06-01) [Artigo]
Grinding - the final machining process of a workpiece - requires large amounts of cutting fluids for the lubrication, cooling and removal of chips. These fluids are highly aggressive to the environment. With the technological ...
Tool Condition Monitoring of Single-Point Dresser Using Acoustic Emission and Neural Networks Models
(IEEE Transactions on Instrumentation and Measurement, 2014-03-01) [Artigo]
Identification and online monitoring of the dresser wear are necessary to guarantee a desired wheel surface and improve the effectiveness of grinding process to a satisfactory level. However, tool wear is a complex phenomenon ...
Utilization of Minimum Quantity Lubrication (MQL) with Water in CBN Grinding of Steel
(Materials Research-ibero-american Journal of Materials, 2014-01-01) [Artigo]
The use of cutting fluids is fundamental to machining processes, mainly when it comes to high heat generation, which is the case of grinding. Thus, lubrication and cooling provided by cutting fluids improve the final quality ...
The cutting time with abrasive discs can be reduced by the control of the cutting speed
(Technical Paper - Society of Manufacturing Engineers. MR, 1997-12-01) [Artigo]
This paper presents an experimental study on the life of abrasive discs in cut-off type operations with two conditions of cutting speed. The cutting time is shown with a comparative analysis of the cutting speed.
Evaluation of different methods of cooling-lubrication in cylindrical grinding of advanced ceramic dip
(Materials Research, 2014-10-01) [Artigo]
The current work presents a study of alternative methods of cooling-lubrication for the external plunge grinding of advanced ceramics using diamond wheels. These two alternative methods, which are intended to reduce cutting ...
Studies on the cooling minimum quantity and conventional cooling at hardened steels in grinding process
(Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2007-04-01) [Artigo]
The purpose of this work is to explain the concept of cutting fluids reasonable usage through the fluid minimum quantity in grinding processes. on that purpose, the development of a new nozzle and an own and adequate ...
Analysis of the Influence of Sparkout Time on Grinding Using Several Lubrication/Cooling Methods
(Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2009-01-01) [Artigo]
The plunge cylindrical grinding operation has been widely employed in the manufacturing process of components which require excellent surface quality achieved within small ranges of dimensional tolerance. The sparkout time ...
Automatic detection of thermal damage in grinding process by artificial neural network
(Rem: Revista Escola de Minas, 2003-12-01) [Artigo]
Esse trabalho tem por objetivo o desenvolvimento de um sistema inteligente para detecção da queima no processo de retificação tangencial plana através da utilização de uma rede neural perceptron multi camadas, treinada ...
Influence of optimized lubrication-cooling and minimum quantity lubrication on the cutting forces, on the geometric quality of the surfaces and on the micro-structural integrity of hardened steel parts
(Revista Materia, 2012-05-25) [Artigo]
The is paper presents an analysis of the influence of minimum quantity lubrication (MQL), optimized and conventional cooling, using different cutting fluid volumes and flow rates, on the surface quality and integrity of ...
Neural models for predicting hole diameters in drilling processes
(Procedia CIRP, 2013) [Artigo]
The control of industrial manufacturing processes is of great economic importance due to the ongoing search to reduce raw materials and labor wastage. Indirect manufacturing operations such as dimensional quality control ...