Now showing items 1-5 of 5
Electromechanical impedance (EMI) technique as alternative to monitor workpiece surface damages after the grinding operation
(International Journal of Advanced Manufacturing Technology, 2018-10-01) [Artigo]
Electromechanical impedance (EMI) technique has been employed in detection of structural failure in civil and mechanical structures because of its non-destructive property and easy implementation of small and inexpensive ...
Surface integrity assessment of M3 HSS cutting taps after grinding at various machining conditions
(International Journal Of Advanced Manufacturing Technology, 2018-09-01) [Artigo]
Grinding is a machining process that provides a combination of good surface finishing and tight dimensional tolerances on a machined component. Owing to these characteristics, it is employed in the finishing process of ...
Contribution to cylindrical grinding of interrupted surfaces of hardened steel with medium grit wheel
(International Journal Of Advanced Manufacturing Technology, 2018-04-01) [Artigo]
Grinding is generally the first choice to provide combination of both superior surface finish and closer dimensional tolerances in a machined component. This process can be employed in manufacturing of continuous and ...
Plunge cylindrical grinding with the minimum quantity lubrication coolant technique assisted with wheel cleaning system
(International Journal Of Advanced Manufacturing Technology, 2018-03-01) [Artigo]
MQL technique is considered as a cleaner machining compared to the conventional coolant delivery one, thereby ensuring environmental sustainability and economic benefits. However, one of problems commonly reported when ...
Minimum quantity of lubrication (MQL) as an eco-friendly alternative to the cutting fluids in advanced ceramics grinding
(International Journal Of Advanced Manufacturing Technology, 2019-08-01) [Artigo]
Advanced ceramics have been extensively used in industry applications due to their properties of high resistance to wear and hardness. However, there is still a high added cost related to the workpiece finish, which is ...