Show simple item record

dc.contributor.authorFiocchi, Arthur Alves [UNESP]
dc.contributor.authorde Angelo Sanchez, Luiz Eduardo [UNESP]
dc.contributor.authorGomes de Oliveira, Joao Fernando
dc.contributor.authorMarinescu, Ioan
dc.date.accessioned2014-05-20T13:27:23Z
dc.date.available2014-05-20T13:27:23Z
dc.date.issued2011-01-01
dc.identifierhttp://dx.doi.org/10.4028/www.scientific.net/AMR.223.879
dc.identifier.citationModelling of Machining Operations. Stafa-zurich: Trans Tech Publications Ltd, v. 223, p. 879-887, 2011.
dc.identifier.issn1022-6680
dc.identifier.urihttp://hdl.handle.net/11449/8984
dc.description.abstractOver the last three decades, researchers have responded to the demands of industry to manufacture mechanical components with geometrical tolerance, dimensional tolerance, and surface finishing in nanometer levels. The new lapgrinding process developed in Brazil utilizes lapping kinematics and a flat grinding wheel dressed with a single-point diamond dresser in agreement with overlap factor (U(d)) theory. In the present work, the influences of different U(d) values on dressing (U(d) = 1, 3 e 5) and grain size of the grinding wheel made of silicon carbide (SiC = 800, 600 e 300 mesh) are analyzed on surface finishing of stainless steel AISI 420 flat workpieces submitted to the lapgrinding process. The best results, obtained after 10 minutes of machining, were: average surface roughness (Ra) 1.92 nm; 1.19 mu m flatness deviation of 25.4 mm diameter workpieces and mirrored surface finishing. Given the surface quality achieved, the lapgrinding process can be included among the ultra-precision finishing processes and, depending on the application, the steps of lapping followed by polishing can be replaced by the proposed abrasive process.en
dc.format.extent879-887
dc.language.isoeng
dc.publisherTrans Tech Publications Ltd
dc.relation.ispartofModelling of Machining Operations
dc.sourceWeb of Science
dc.subjectLapgrindingen
dc.subjectUltra Precisionen
dc.subjectSurface Finishingen
dc.subjectNanotechnologyen
dc.titleInvestigation on Surface Finishing of Components Ground with Lapping Kinematics: Lapgrinding Processen
dc.typeTrabalho apresentado em evento
dcterms.licensehttp://www.ttp.net/Downloads.html
dcterms.rightsHolderTrans Tech Publications Ltd
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)
dc.description.affiliationSão Paulo State Univ Unesp, Dept Mech Engn, BR-17033360 Bauru, SP, Brazil
dc.description.affiliationUnespSão Paulo State Univ Unesp, Dept Mech Engn, BR-17033360 Bauru, SP, Brazil
dc.identifier.doi10.4028/www.scientific.net/AMR.223.879
dc.identifier.wosWOS:000291824000092
dc.rights.accessRightsAcesso aberto
unesp.campusUniversidade Estadual Paulista (UNESP), Faculdade de Engenharia, Baurupt
unesp.author.orcid0000-0003-4870-1095[3]
dc.relation.ispartofsjr0,121
Localize o texto completo

Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record