Influence of the grinding wheel's dive speed on the damage of rectified hardened steels
Nenhuma Miniatura disponível
Data
2008-01-01
Autores
Alves, M. C. S. [UNESP]
Bianchi, E. C. [UNESP]
Aguiar, P. R. [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Univ Fed Rio de Janeiro, Lab Hidrogenio
Resumo
The world tendency is the increase of the productivity and the production of pieces more and more sophisticated, with high degree of geometric and dimensional tolerances, with good surface finish and low cost. Rectification is responsible for the final finish in the machining process of a material. However, damages generated in this production phase affect all the resources used in the previous processes. Great part of the problems happennig in the rectification process is due to the enormous temperature generated in this activity because of the machining conditions. The dive speed, which is directly related to the productivity, is considered responsible for the damages that occur during rectification, limiting its values to those that do not cause such damages. In this work, through the variation of the dive speed in the process of cylindrical grinding of type ABNT D6 steel, rationalizing the application of two cutting fluids and using a CBN (cubic boron nitrate) abrasive wheel with vitrified blond, the influence of the dive speed on the surface damages of hardened steels was evaluated. The results allowed to say that the dive speed, associated to an efficient cooling and lubrication, didn't provoke thermal damages (including heated zones, cracks and tension stresses) to the material. Residual stresses and the roughness of rectified materials presented a correlation with the machining conditions. The work concluded that it is possible to increase the productivity without provoking damages in the rectified components.
Descrição
Palavras-chave
hardened Steels, rectification, thermal damages, roughness, residual stresses, grinding, dive speed
Como citar
Materia-rio de Janeiro. Rio de Janeiro Rj: Univ Fed Rio de Janeiro, Lab Hidrogenio, v. 13, n. 4, p. 636-642, 2008.