Show simple item record

dc.contributor.authorCortez Pereira, Gilda Maria [UNESP]
dc.contributor.authorde Souza, Marisa Aparecida [UNESP]
dc.contributor.authorHashimoto, Tomaz Manabu [UNESP]
dc.contributor.authorRodrigues Henriques, Vinicius Andre
dc.contributor.authorRamos, Alfeu Saraiva [UNESP]
dc.date.accessioned2014-05-20T13:28:14Z
dc.date.available2014-05-20T13:28:14Z
dc.date.issued2012-01-01
dc.identifierhttp://dx.doi.org/10.4028/www.scientific.net/MSF.727-728.233
dc.identifier.citationAdvanced Powder Technology Viii, Pts 1 and 2. Stafa-zurich: Trans Tech Publications Ltd, v. 727-728, p. 233-238, 2012.
dc.identifier.issn0255-5476
dc.identifier.urihttp://hdl.handle.net/11449/9380
dc.description.abstractThis work discusses on the preparation of Ni-45Ti-5Mo, Ni-40Ti-10Mo and Ni-46Ti-2Mo-2Zr (at-%) alloys by high-energy ball milling and hot pressing, which are potentially attractive for dental and medical applications. The milling process was performed in stainless steel balls (19mm diameter) and vials (225 mL) using a rotary speed of 300rpm and a ball-to-powder weight ratio of 10:1. Hot pressing under vacuum was performed in a BN-coated graphite crucible at 900 degrees C for 1 h using a load of 20 MPa. The milled and hot-pressed materials were characterized by X-ray diffraction, electron scanning microscopy, and electron dispersive spectrometry. Peaks of B2-NiTi and Ni4Ti3 were identified in XRD patterns of Ni-45Ti-5Mo, Ni-40Ti-10Mo and Ni-46Ti-2Mo-2Zr powders milled for 1h. The NiTi compound dissolved small Mo amounts lower than 4 at%, which were measured by EDS analysis. Moreover, it was identified the existence of an unknown Mo-rich phase in microstructures of the hot-pressed Ni-Ti-Mo alloys.en
dc.format.extent233-238
dc.language.isoeng
dc.publisherTrans Tech Publications Ltd
dc.relation.ispartofAdvanced Powder Technology Viii, Pts 1 and 2
dc.sourceWeb of Science
dc.subjectamorphousen
dc.subjectmechanical alloyingen
dc.subjectnickel alloysen
dc.subjectnitinolen
dc.titlePreparation of Ni-Ti-Mo and Ni-Ti-Mo-Zr Alloys by High-Energy Ball Milling and Subsequent Hot Pressingen
dc.typeTrabalho apresentado em evento
dcterms.rightsHolderTrans Tech Publications Ltd
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)
dc.description.affiliationUniv Estadual Paulista, Dept Mat & Tecnol, BR-12516410 Guaratingueta, SP, Brazil
dc.description.affiliationUnespUniv Estadual Paulista, Dept Mat & Tecnol, BR-12516410 Guaratingueta, SP, Brazil
dc.identifier.doi10.4028/www.scientific.net/MSF.727-728.233
dc.identifier.wosWOS:000310714100042
dc.rights.accessRightsAcesso aberto
unesp.campusUniversidade Estadual Paulista (UNESP), Faculdade de Engenharia, Guaratinguetápt
dc.identifier.lattes1868573083430307
unesp.author.lattes1868573083430307
dc.relation.ispartofsjr0,180
Localize o texto completo

Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record