Photoelastic analysis of conventional and locking system for treatment of mandibular angle fractures with a single plate
Nenhuma Miniatura disponível
Data
2021-04-01
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Resumo
Background: This photoelastic analysis evaluated stress distribution in different osteosynthesis systems, conventional and locking, used for treatment of mandibular angle fractures with a single plate. Material and Methods: Angle fractures were simulated in mandibles made of photoelastic resin. Following Champy’s method, plate osteosynthesis was performed. The samples were divided into five groups: Group 1, non-fractured mandible; Group 2, two screws were installed in each segment using a conventional system; Group 3, two screws were installed in each segment using a locking system; Group 4, three screws were installed in the proximal segment and four screws in the distal segment using a conventional plate; Group 5, three screws were installed in the proximal segment and four screws in the distal segment using a locking plate. In universal testing machine coupled to a polariscope, a load was applied to the first molar 10 times. The 50 images were randomly numbered and analyzed qualitatively and quantitatively by two raters. Results: The locking system promoted better stress distribution along the osteosynthesis. The locking system redu- ced stress magnitude in the distal segment, with a significant between-group difference (P≤ 0.001). Conclusions: The locking plate/screw system can distribute stress more evenly throughout the osteosynthesis, especially when long seven-hole plates are used.
Descrição
Palavras-chave
Idioma
Inglês
Como citar
Journal of Clinical and Experimental Dentistry, v. 13, n. 4, p. e328-e333, 2021.
