Application of a wheel cleaning system during grinding of alumina with minimum quantity lubrication

Nenhuma Miniatura disponível

Data

2019-05-01

Orientador

Coorientador

Pós-graduação

Curso de graduação

Título da Revista

ISSN da Revista

Título de Volume

Editor

Springer

Tipo

Artigo

Direito de acesso

Acesso abertoAcesso Aberto

Resumo

High thermal loads generated during grinding of ceramic materials increase abrasive tool wear and damage workpiece quality. In this regard, the application of cutting fluid has been mandatory, although several researchers have been working to reduce oil consumption in such processes, as it increases the cost of the final product and is harmful to both people and environment. Among the alternatives, minimum quantity lubrication (MQL) has been increasingly investigated, even though clogging of the grinding wheel is prone to occur. In order to improve the cleaning of the abrasive tool during the process and reduce oil consumption, this paper proposes the investigation of the performance of MQL technique applied together with a wheel cleaning system, which consists of a compressed air jet directed to the wheel surface, during grinding of alumina. Different direction angles of the air jet were tested and conventional flood coolant as well as MQL alone were applied for comparison purposes. Flood coolant was the most efficient method regarding cleaning of the grinding wheel, decrease of diametral wheel wear, surface roughness, and average power followed by the use of MQL with an air jet directed to the wheel surface with an angle of 30 degrees. This latter arrangement, however, can become an option when the reduction of oil consumption is a priority, as it provides the best results when compared to the other air jet direction angle configurations.

Descrição

Idioma

Inglês

Como citar

International Journal Of Advanced Manufacturing Technology. London: Springer London Ltd, v. 102, n. 1-4, p. 333-341, 2019.

Itens relacionados