Structural Performance Analysis of Cross-Laminated Timber-Bamboo (CLTB)
Nenhuma Miniatura disponível
Data
2019-01-01
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
North Carolina State Univ Dept Wood & Paper Sci
Tipo
Artigo
Direito de acesso
Acesso restrito
Resumo
Construction systems based on cross-laminated timber (CLT) have versatility in material development and are an interesting alternative for construction. This study evaluated the structural performance of cross- laminated timber-bamboo produced from wood (Pinus spp.) and bamboo (Dendrocalamus giganteus). Panels were produced by strips (wood and bamboo) assorted, under non-destructive structural grading, to support a better panel configuration. Small-length pine pieces were also included in the study, considering their low added-value and underutilization in sawmills from Telemaco Borba, Brazil. Gluing tests of small specimens were performed to evaluate the bonding quality of three adhesives: melamine-urea-formaldehyde (MUF), isocyanate polymeric emulsion (IPE), and castor oil-based resin (COR). Shear stress strength parallel to grain between bamboo and wood showed the best performance for MUF resin. After preliminary gluing testing, eight cross-laminated panels were produced with MUF adhesive in a three-layered configuration, with transversal orientation: two external bamboo layers and a central layer of pine wood. Stiffness and rupture strength values were above those specified by the ANSI/APA PGR 320 (2012) standard. Elasticity and rupture moduli were 13,310 MPa and 65 MPa, respectively, showing good potential of this composite for structural uses.
Descrição
Idioma
Inglês
Como citar
Bioresources. Raleigh: North Carolina State Univ Dept Wood & Paper Sci, v. 14, n. 3, p. 5045-5058, 2019.