Revista Brasileira de Engenharia Agrícola e Ambiental Campina Grande, PB, UAEA/UFCG – http://www.agriambi.com.br ISSN 1807-1929 v.21, n.10, p.715-720, 2017 Processing on the sanitary quality of seeds of Panicum maximum cv. ‘Tanzânia’ Lilian F. Melo1, Givanildo Z. da Silva1, Rita C. Panizzi2 & Cibele C. Martins1 DOI: http://dx.doi.org/10.1590/1807-1929/agriambi.v21n10p715-720 A B S T R A C T The aim of this study was to evaluate the sanitary quality of seeds of Panicum maximum cv. ‘Tanzânia’, following the several phases of the seed processing process. Seeds were sampled before processing and after leaving the air and screen machine (upper and intermediary screens and bottom); first gravity table (drift, upper and intermediate spouts); second gravity table (upper, intermediate, and lower spouts), and treating machine for dyeing the seeds. The sanitary analyses were conducted according to the filter paper method, with and without superficial disinfestation of the seeds, which were incubated at a temperature of 20 ± 2 °C with photoperiod of 12 h for seven days. Some seed processing steps may reduce the incidence of seeds of P. maximum cv. ‘Tanzania’ contaminated with Phoma sp. and Helminthosporium sp. In general, the processing can increase the incidence of seeds contaminated with Cladosporium sp. and Cercospora sp. The fungi Phoma sp., Helminthosporium sp., Penicillium sp., Cladosporium sp. and Cercospora sp. are found inside and outside the seeds and can be disseminated by the processing machines. Beneficiamento na qualidade sanitária de sementes de Panicum maximum cv. Tanzânia R E S U M O Objetivou-se, neste trabalho, avaliar a qualidade sanitária de sementes de Panicum maximum cv. Tanzânia durante as etapas de beneficiamento. As sementes foram amostradas antes do processamento e após a saída da máquina de ventilador e peneiras (descarga das peneiras superior, intermediária e fundo), primeira mesa gravitacional (deriva, descarga superior e intermediária), mesa gravitacional (descarga superior, intermediária e inferior) e máquina tratadora para tingimento das sementes. A análise sanitária foi realizada pelo método do papel de filtro com e sem desinfestação superficial das sementes, as quais foram incubadas a 20 ± 2 °C, com fotoperíodo de 12 h durante sete dias. Algumas etapas de beneficiamento podem reduzir a porcentagem de sementes de P. maximum cv. Tanzânia contaminadas com Phoma sp. e Helminthosporium sp. Em geral, o beneficiamento pode aumentar a porcentagem de sementes com Cladosporium sp. e Cercospora sp. Os fungos Phoma sp., Helminthosporium sp., Penicillium sp., Cladosporium sp. e Cercospora sp. se encontram alojados nas sementes interna e externamente e podem ser disseminados pelas máquinas de beneficiamento. Key words: processing seed pathology health Palavras-chave: processamento patologia de sementes sanidade 1 Universidade Estadual Paulista/Faculdade de Ciências Agrárias e Veterinárias/Departamento de Produção Vegetal. Jaboticabal, SP. E-mail: lilianfariamelo@gmail.com; givanildozildo@hotmail.com; cibele@fcav.unesp.br (Corresponding author) 2 Universidade Estadual Paulista/Faculdade de Ciências Agrárias e Veterinárias/Departamento de fitossanidade. Jaboticabal, SP. E-mail: rpanizzi@fcav.unesp.br Ref. 215-2016 – Received 8 Jan, 2017 • Accepted 31 Mar, 2017 • Published 25 Aug, 2017 716 Lilian F. Melo et al. R. Bras. Eng. Agríc. Ambiental, v.21, n.10, p.715-720, 2017. Introduction The lots of Panicum spp. seeds received by the companies contain earth, rocks, straw and empty spikelets and these impurities should be removed by the processing in order to meet the requirements for commercialization (Melo et al., 2016a, 2016b). Processing machines perform sequential operations of cleaning, classification and treatments that allow the improvement of seed quality and disposal of undesired material (Hessel et al., 2012; Melo et al., 2016a, 2016b). This process, however, can also increase the chances of seed contamination, because the earth existing in the lots is deposited inside the machines and may contain fungal structures that contaminate the subsequently processed lots, as observed by Linares (1999) in bean seeds. Therefore, the processing of forage grass seeds must be enhanced in order to improve its sanitary quality (Marchi et al., 2010). In seeds of P. maximum and Brachiaria spp., researchers have detected potentially pathogenic fungi such as the genera Curvularia, Fusarium, Phoma, Exserohilum, Cercospora and Helminthosporium, besides others, such as Alternaria, Aspergillus, Cladosporium, Epicoccum, Nigrospora, Penicillium and Trichoderma, (Marchi et al., 2010; Martinez et al., 2010; Mallmann et al., 2013; Marcos et al., 2015). These seeds can be a vehicle of dispersion of pathogens between regions (Vechiato et al., 2010). The rejects of the processing can also contribute to spreading fungi, because this material is commonly purchased by companies with low technological level from the forage seeds sector to be mixed with the lots intended for less demanding markets (Hessel et al., 2012). Thus, this study aimed to evaluate the influence of the processing on fungal incidence in seeds of P. maximum cv. ‘Tanzânia’. Material And Methods The seeds of P. maximum cv. ‘Tanzânia’ were harvested by ground sweeping in the 2013/2014 season in Jales, SP, processed in a forage grass seed processing unit, passing through an air and screen machine, two gravity tables and one treating machine to dye the seeds. The sequence of processing operations for forage seeds described by Melo et al. (2016b) was adopted. Eleven treatments were obtained in the various processing steps and different machines, as described below: T1 - control composed by raw seed, not processed. Air and screen machine: T2 - after passing through the air and screen machines, the samples were collected from the material retained on the top screen, which has round mesh with diameter of 5.56 mm. T3 - 20 AWG (0.8118-mm diameter) twisted wire intermediate screen, with square mesh and 30 x 30 mm opening. T4 - metal plate bottom, which retained the fine material that passed through the screens. The seed company routinely discards the material from treatments T2 and T4, because it contains more than 90% of impurities (Melo et al., 2016b). First gravity table: T5 - samples were collected from the drift material removed by an aspirator at the inlet of this machine, also considered as reject by the company, because it contains 97% of impurities in its composition (Melo et al., 2016b). The surface of this device was 2.40 m long and 1.25 m wide, with vibration speed of 1,750 rpm, 17º and 12º of transverse and longitudinal inclination, respectively. T6 - After passing on the first gravity table, the samples were collected at the upper spout, composed of the fraction of material collected at 35 cm from the highest end of the table’s outlet considering its lateral inclination. T7 - Samples collected at the intermediate spout, composed of material collected in the 60-cm intermediate segment of the table’s outlet. The seeds of the lower spout, composed of the fraction of material collected in the 30-cm segment from the lowest end of the table considering its lateral inclination, were not sampled, but instead passed on a second gravity table. Seed treating machine: T8 - in the sequence, only the seeds from the intermediate spout of the first gravity table were subjected to dyeing, aiming only to improve their appearance, performed by spraying the green dye of Laborsan Brasil® and mechanical movement of the mass in the treating machine Seed Mix VHM- 4/10 T. Second gravity table: T9 - the seeds were collected after passing on the second gravity table, identical to the first one, but with different adjustments of the spouts, because the upper spout was composed of the fraction of material collected in the 60-cm segment from the highest end of the table’s outlet. T10 - intermediate spout, composed of the material collected in the 45-cm intermediate segment and T11 - lower spout, composed of the material collected in the 20- cm segment of the lowest end. The seed company routinely considers as rejects the materials from treatments T10 and T11, because it contains more than 90% of impurities (Melo et al., 2016b). The samples collected after the processing steps were reduced in soil splitter to obtain the working sample and the portion of pure seeds was separated for health analysis (BRASIL, 2009). The health test was conducted at the Seed Pathology Laboratory of the Plant Health Department of the Faculty of Agrarian and Veterinary Sciences - (UNESP), Campus of Jaboticabal, SP, through the filter paper method (Blotter test) without and with superficial disinfestation of the seeds through immersion in NaClO (1%) for 3 min, followed by rinsing with sterilized water and drying at room temperature. For the test, 10 replicates of 10 seeds of each treatment were distributed equidistantly on three sheets of filter paper previously moistened with distilled water and incubated on 9.0-cm-diameter Petri dishes for 7 days, at 20 ± 2 °C and under 12 h of light (Martins et al., 2001). Then, the seeds were individually analyzed under stereoscopic microscope and the fungi were identified through the morphological characteristics of their structures (Barnett & Hunter, 1998). The results were expressed in percentage of contaminated seeds, for each fungus. The experiment was evaluated using a completely randomized design, in 2 x 11 factorial scheme (superficial disinfestation x processing steps). The data of fungal incidence 717Processing on the sanitary quality of seeds of Panicum maximum cv. ‘Tanzânia’ R. Bras. Eng. Agríc. Ambiental, v.21, n.10, p.715-720, 2017. (%) in the seeds were transformed to (x + 0.01)0.5 to meet the assumptions of normality and homogeneity tests. The presented means are relative to the original data, which were subjected to analysis of variance by F test. The means of the treatments were compared by Tukey test at 0.05 probability level. Results and Discussion The pathological analysis of P. maximum seeds, cv. ‘Tanzânia’, detected twelve fungal genera: six with higher incidence, above 5%, such as Phoma, Helminthosporium, Cladosporium, Cercospora, Fusarium and Penicillium, and the others with low incidence, inferior to 3%, regardless of the processing step or disinfestation procedure, such as Curvularia, Alternaria, Epicoccum, Rhizopus, Aspergillus and Rizoctonia (Figure 1). Almost all these last six fungi with low incidence in the lot were not affected by the seed processing steps or disinfestation, except Alternaria sp., which increased from 0.63 to 3.63%, only due to the disinfestation procedure (data not shown). Probably, the higher incidence of Alternaria sp. in disinfested seeds may have occurred because of the reduction in the fungi of other genera, which competed for survival. This fact was observed for fungi of other genera in studies with seeds of forage grasses (Santos et al., 2014). The occurrence of some fungi, even at percentages lower than 10%, still represents a risk of loss of seed quality, because these microorganisms have high capacity of multiplication and contamination of the lots in the storage, as observed for Penicillium sp. and Aspergillus sp. in soybean seeds (Cardoso et al., 2004). The reduction in the occurrence of the genera Phoma, Helminthosporium, Fusarium, Penicillium, Cladosporium and Cercospora due to the disinfestation process (Figure 1) leads to the conclusion that a significant percentage of the structures of these fungi is found on seed surface and they can be disseminated by the machines during the processing, from one lot to another, as observed by Linares (1999) in bean seeds. As shown in Figure 2, the forage grass seed processing units usually have large amount of dust and earth suspended in the air and the machines are impregnated with these particles, which may contain fungal structures. On the other hand, the presence of Phoma sp. , Helminthosporium sp., Penicillium sp., Cladosporium sp. and Figure 1. Total incidence of fungi detected during the sanitary test in seeds of P. maximum cv. ‘Tanzânia’, with and without superficial disinfection Figure 2. Dust and earth in suspension impregnating the gravity table (A) and the air and screen machine (B) during the processing of Panicum maximum seeds A. B. Cercospora sp. also in disinfested seeds allows to infer that the dissemination structures were found inside the seeds of P. maximum. Therefore, part of the contamination with these pathogens must have occurred still at the field during seed formation. This fact is possible, because there are reports on the occurrence of these fungi in pastures (Martinez et al., 2010; Mallmann et al., 2013). Among the studied fungi, the interaction of the seed processing steps and disinfestation procedure was only observed on the percentage of incidence of Phoma sp., Helminthosporium sp., Fusarium sp. and Penicillium sp. (Table 1). The disinfestation significantly reduced the incidence of Phoma sp. in the seeds obtained in almost all processing steps, except in those from the treating machine (T8). In this operation, the seeds were dyed and the procedure may have washed part of the dissemination structures present on seed surface. The seeds without disinfestation showed lower percentage of pathogens in comparison to those disinfested and subjected to the treating machine. For the incidence of Phoma sp. in the seeds without superficial disinfestation, compared with the control, there were lower percentages of this pathogen in samples from the reject material obtained at the bottom of the air and screen machine (T4), in the upper spout of the first gravity table (T6), after the seed treating machine (T8) and in the lower spout 718 Lilian F. Melo et al. R. Bras. Eng. Agríc. Ambiental, v.21, n.10, p.715-720, 2017. of the second gravity table (T11). Thus, it demonstrated the importance of the processing to reduce fungal structures of Phoma sp. in the seeds of P. maximum, cv. ‘Tanzânia’. These results allow to claim that the rejects of the processing can also represent risk of fungal dissemination to other pasture areas, because this material is usually commercialized and mixed with other lots to meet less demanding markets of forage seeds (Hessel et al., 2012; Mallmann et al., 2013). The percentage of Helminthosporium sp. in the seeds was reduced by the superficial disinfestation and there was higher incidence of this microorganism in the seeds without disinfestation; this event was observed in some treatments, such as seeds not processed (T1), from the bottom of the air and screen machine (T4) and lower spout of the second gravity table (T11). In the seeds without disinfestation, the reject material obtained in the upper screen of the air and screen machine (T2) and drift of the first gravity table (T5) and seeds obtained in the intermediate spout of the first gravity table (T7) showed lower incidence of Helminthosporium sp. in comparison to the control. Hence, it highlights the importance of seed processing for the improvement of sanitary quality, corroborating the reports of Fessel et al. (2003) for maize seeds and Mertz et al. (2007) for cowpea seeds. The processing steps did not affect the incidence of Fusarium sp. in the seeds, because none of them significantly altered the occurrence of this fungus, regardless of the disinfestation process. The superficial disinfestation of the seeds also did not affect the incidence of Fusarium sp. along each processing step. This means that the detected fungus was found inside the seeds (Cappelini et al., 2005). Phoma sp. and Fusarium sp. can be considered as the main pathogenic microorganisms associated with forage grass seeds, have rapid, aggressive growth, and can cause seed death and reduction in seedling emergence percentage (Yang et al., 2011; Kuhnem Júnior et al., 2013; Mallmann et al., 2013). Additionally, they were considered by Martins et al. (2001) and Marchi et al. (2010) as the most common fungi in pastures of P. maximum. In general, Penicillium sp. was found with low frequency in the treatments, between 0 and 14%. This is considered by Vechiato et al. (2010) as a fungus of storage and its low incidence in this research can be attributed to the use of recently collected seeds. There was no interaction between the seed processing steps and disinfestation procedure on the occurrence of Cladosporium sp. and Cercospora sp. (Table 2). However, the disinfestation reduced the incidence of these fungi, possibly because they are found on the surface of the seeds. Table 1. Fungal incidence in seeds of Panicum maximum cv. ‘Tanzânia’ with (WD) and without (WOD) superficial disinfestation with sodium hypochlorite, as a function of the processing steps Processing steps (P) Phoma sp. Helminthosporium sp. Fusarium sp. Penicillium sp. % WOD WD WOD WD WOD WD WOD WD T1 65 dB 30 bcA 64 cB 28 aA 6 abcA 11 abA 0 aA 0 aA T21 53 cdB 14 abA 23 abA 24 aA 1 aA 10 abB 4 abA 8 bA T3 46 bcdB 29 bcA 54 cA 46 aA 2 abA 3 aA 0 aA 1 abA T41 27 abB 12 aA 45 abcB 20 aA 6 abcA 4 aA 5 abA 5 abA T51 48 bcdB 30 bcA 27 abA 27 aA 2 abA 3 aA 1 aA 5 abA T6 31 abcB 19 abA 42 abcA 31 aA 14 bcA 11 abA 5 abB 0 aA T7 49 bcdB 31 bcA 21 aA 28 aA 6 abcA 3 aA 2 aA 2 abA T8 17 aA 30 bcB 30 abcA 35 aA 18 cB 2 aA 1 aA 1 abA T9 44 bcdA 42 cA 33 abcA 36 aA 9 abcA 20 bB 0 aA 2 abA T101 40 bcdA 33 bcA 42 abcA 37 aA 20 cB 5 aA 14 bB 4 abA T111 31 abcA 28 bcA 47 bcB 28 aA 17 Cb 7 abA 7 abA 7 abA F Disinfestation (D) 38.12** 6.68* 1.78* 6.68* F Processing (P) 6.85** 3.55** 4.45** 3.55** F (D x P) 4.66** 2.80** 4.41** 2.80** CV (%) 28.37 30.79 90.65 30.79 **; *Significant at 0.01 and 0.05 probability levels by F test, respectively; Means followed by the same lowercase letter in the column and same uppercase letter in the row do not differ by Tukey test at 0.05 probability level; ASM - Air and screen machine; GTI - First gravity table; GTII - Second gravity table; T1 - Control (not processed); T2 - Upper screen of the ASM (reject); T3 - Intermediate screen of the ASM; T4 - Bottom of the ASM (reject); T5 - Drift GTI (reject); T6 - Upper spout of GTI; T7 - Intermediate spout of GTI; T8 - Treating machine (T7 + dyeing); T9 - Upper spout of GTII; T10 - Intermediate spout of GTII (reject); T11 - Lower spout of GTII (reject); 1Processing steps that result in reject material by the company, for having more than 90% of impurities in its composition **; *Significant at 0.01 and 0.05 probability levels by F test, respectively; Means followed by the same lowercase letter in the column and same uppercase letter in the row do not differ by Tukey test at 0.05 probability level; ASM - Air and screen machine; GTI - First gravity table; GTII - Second gravity table; T1 - Control (not processed); T2 - Upper screen of the ASM (reject); T3 - Intermediate screen of the ASM; T4 - Bottom of the ASM (reject); T5 - Drift GTI (reject); T6 - Upper spout of GTI; T7 - Intermediate spout of GTI; T8 - Treating machine (T7 + dyeing); T9 - Upper spout of GTII; T10 - Intermediate spout of GTII (reject); T11 - Lower spout of GTII (reject); 1Processing steps that result in reject material by the company, for having more than 90% of impurities in its composition Processing steps (P) Cladosporium sp. Cercospora sp. (%) T1 5 a 7 a T21 9 ab 7 a T3 3 a 10 ab T41 20 b 9 ab T51 11 ab 12 ab T6 18 b 12 ab T7 15 b 12 ab T8 15 b 19 b T9 18 b 15 ab T101 18 b 14 ab T111 16 b 14 ab F Disinfestation (D) 38.55** 42.10** F Processing (P) 4.70** 2.33* F D x P 1.70ns 1.61ns CV (%) 69.78 76.95 Table 2. Fungal incidence in seeds of Panicum maximum cv. ‘Tanzânia’ with and without superficial disinfestation with sodium hypochlorite, as a function of the processing steps 719Processing on the sanitary quality of seeds of Panicum maximum cv. ‘Tanzânia’ R. Bras. Eng. Agríc. Ambiental, v.21, n.10, p.715-720, 2017. Regarding the effect of processing steps on the incidence of Cladosporium sp., it was possible to observe, in comparison to the control, that the reject from the bottom of the air and screen machine (T4) and all samples from the spouts of the two gravity tables (T6, T7, T9, T10 and T11) and from the treater (T8) have seeds with higher percentage of contamination. Therefore, in general, the processing favored the increase in the incidence of Cladosporium sp. Some fungi, such as Cladosporium sp., are favored by mechanical damages to the seeds, as observed in soybean by Gomes et al. (2009). In the processing, the successive impacts and falls in the deposits of the machines cause injuries; therefore, these damages are cumulative and favor the access of microorganisms to the inside of the seeds (Carvalho & Nakagawa, 2012). This phenomenon must have favored the incidence of Cladosporium sp., because the final steps of the processing contain seeds with higher percentages of this pathogen. The same phenomenon seems to have occurred with Cercospora sp., although it was only possible to observe higher significant incidence of this fungus in comparison to the control, due to the use of the treater to dye the seeds (T8). The increase in incidence of Cercospora sp. due to the treater (T8) may have been caused by the greater mechanical damage caused by the machine during the movement of the seeds soaked in the dyeing solution, favoring the access of the fungus. Conclusions 1. Some processing steps can reduce the percentage of seeds of P. maximum cv. ‘Tanzânia’ contaminated with Phoma sp. and Helminthosporium sp. 2. The processing, in general, can increase the percentage of seeds with Cladosporium sp. and Cercospora sp. 3. Phoma sp., Helminthosporium sp., Penicillium sp., Cladosporium sp. and Cercospora sp. are found inside and outside the seeds and can be disseminated by the processing machines. Literature Cited Brasil. Ministério da Agricultura, Pecuária e Abastecimento. Regras para Análise de Sementes. Brasília/DF: MAPA/ACS, 2009. 395p. Barnett, H. L.; Hunter, B. Illustrated genera of imperfect fungi. 4.ed. St. Paul. Minnesota: The American Phytopathological Society, 1998. 273p. Cappelini, L. T. D.; Panizzi, R. C.; Vieira, R. D.; Galli, J. A. Efeito de Fusarium moniliforme na qualidade de sementes de milho. Científica, v.33, p.185-191, 2005. Cardoso, P. C.; Baudet, L.; Peske, S. T.; Lucca Filho, O. A. Armazenamento em sistema a frio de sementes de soja tratadas com fungicida. Revista Brasileira de Sementes, v.26, p.15-23, 2004. https://doi.org/10.1590/S0101-31222004000100003 Carvalho, N. M.; Nakagawa, J. Sementes: Ciência, tecnologia e produção. 5.ed. Jaboticabal: FUNEP, 2012. 590p. Fessel, S. A.; Sader, R.; Paula, R. C.; Galli, J. A. Avaliação da qualidade física, fisiológica e sanitária de sementes de milho durante o beneficiamento. Revista Brasileira de Sementes, v.25, p.70-76, 2003. https://doi.org/10.1590/S0101-31222003000400010 Gomes, D. P.; Kronka, A. Z.; Barrozo, L. M.; Silva, R. P. da; Souza, A. L.; Silva, B. M. S. S.; Panizzi, R. de C. Efeito da colhedora, velocidade e ponto de coleta na contaminação de sementes de soja por fungos. Revista Brasileira de Sementes, v.31, p.160-166, 2009. https://doi. org/10.1590/S0101-31222009000300018 Hessel, C. L. E.; Villela, F. A.; Aumonde, T. Z.; Pedó, T. Mesa densimétrica e qualidade fisiológica de sementes de brachiária. Informativo Abrates, v.22, p.73-76, 2012. Kuhnem Júnior, P. R.; Stumpf, R.; Spolti, P.; Del Ponte, E. M. Características patogênicas de isolados do complexo Fusarium graminearum e de Fusarium verticillioides em sementes e plântulas de milho. Ciência Rural, v.43, p.583-588, 2013. https://doi. org/10.1590/S0103-84782013000400004 Linares, J. B. F. Qualidade de sementes de feijoeiro (Phaseolus vulgaris L.) de diversas densidades obtidas na mesa gravitacional. Campinas: UEC, 1999. 50p. Dissertação Mestrado Mallmann, G.; Verzignassi, J. R.; Fernandes, C. D.; Santos, J. M. dos; Vechiato, M. H.; Inácio, C. A.; Batista, M. V.; Queiróz, C. de A. Fungos e nematoides associados a sementes de forrageiras tropicais. Summa Phytopathologica, v.39, p.201-203, 2013. https:// doi.org/10.1590/S0100-54052013000300010 Marchi, C. E.; Fernandes, C. D.; Bueno, M. L.; Batista, M. V.; Fabris, L. R. Fungos veiculados por sementes comerciais de braquiária. Arquivo Instituto Biológico, v.77, p.65-73, 2010. Marcos, M. F.; Jank, L.; Fernandes, C. D.; Verzignassi, J. R.; Mallmann, G.; Queiróz, C. de A.; Batista, M. V. Reação à Bipolaris maydis, agente causal da mancha foliar, em híbridos apomíticos de Panicum maximum. Summa Phytopathologica, v.41, p.197-201, 2015. https://doi.org/10.1590/0100-5405/2078 Martinez, A. da S.; Franzener, G.; Stangarlin, J. R. Dano causado por Bipolaris maydis em Panicum maximum cv. Tanzânia. Semina: Ciências Agrárias, v.31, p.863-870, 2010. https://doi. org/10.5433/1679-0359.2010v31n4p863 Martins, L.; Silva, W. R.; Almeida, R. R. Sanidade em sementes de Brachiaria brizantha (Hochst.ex A.Rich) stapf submetidas a tratamentos térmicos e químico. Revista Brasileira de Sementes, v.23, p.117-120, 2001. https://doi.org/10.17801/0101-3122/rbs. v23n2p117-120 Melo, L. F. de; Martins, C. C.; Silva, G. Z. da; Boneti, J. E. B.; Vieira, R. D. Beneficiamento na qualidade física e fisiológica de sementes de capim-mombaça. Revista Ciência Agronômica, v.47, p.667- 674, 2016a. Melo, L. F. de; Martins, C. C.; Silva, G. Z. da; Sanches, M. F. G. Processing in the quality of Tanzânia grass seeds. Engenharia Agrícola, v.36, p.1157-1166, 2016b. https://doi.org/10.1590/1809- 4430-eng.agric.v36n6p1157-1166/2016 Mertz, L. M.; Henning, F. A.; Maia, M. de S.; Meneghello, G. E.; Henriques, A.; Madail, R. Qualidade fisiológica e sanitária de sementes de feijão-miúdo beneficiadas em mesa gravitacional. Revista Brasileira de Sementes, v.29, p.1-8, 2007. https://doi. org/10.1590/S0101-31222007000300001 Santos, G. R. dos; Tschoeke, P. H.; Silva, L. G. da; Silveira, M. C. A. C. da; Reis, H. B.; Brito, D. R.; Carlos, D. de S. Sanitary analysis, transmission and pathogenicity of fungi associated with forage plant seeds in tropical regions of Brazil. Journal of Seed Science, v.36, p.1-9, 2014. 720 Lilian F. Melo et al. R. Bras. Eng. Agríc. Ambiental, v.21, n.10, p.715-720, 2017. Vechiato, M. H.; Aparecido, C. C.; Fernandes, C. D. Frequência de fungos em lotes de sementes comercializadas de Brachiaria e Panicum. São Paulo: Instituto Biológico, 2010. 11p. Documento Técnico, 007 Yang, F.; Svensson, B.; Finnie, C. Response of germinating barley seeds to Fusarium graminearum: The first molecular insight into Fusarium seedling blight. Plant Physiology and Biochemistry, v.49, p.1362-1368, 2011. https://doi.org/10.1016/j.plaphy.2011.07.004