Preparação e caracterização de compósitos condutores obtidos a partir da borracha natural com raspa de couro e negro de fumo
Carregando...
Arquivos
Data
2009-06-02
Autores
Alves, Aguinaldo Lenine [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Estadual Paulista (Unesp)
Resumo
Compósitos condutores são materiais preparados para combinar as propriedades físicas dos polímeros com partículas condutivas. Neste trabalho, são apresentadas a preparação e caracterização de compósitos condutores contendo borracha natural (BN), raspa de couro (RC) e negro de fumo (NF). As Amostras foram conformadas em diferentes percentuais em massa dos constituintes BN, RC e NF: 38/60/2.0; 37.5/60/2.5; 37/60/3.0 e 36.5/60/3.5, respectivamente, aplicando uma pressão de 12 toneladas durante o 5 minutos à temperatura de 160°C, resultando em membranas com boa qualidade e com a espessura desejada. Os compósitos BN/RC/NF foram caracterizados por microscopia óptica (MO), microscopia eletrônica varredura (MEV), Microscopia de Força Atômica (AFM), espectroscopia Raman e infravermelho, termogravimetria (TG), calorimetria exploratória de varredura (DSC), análise dinâmico mecânica (DMA), testes mecânicos (Tensão versus deformação) e medidas de condutividade elétrica. A presença do NF no compósitos BN/ RC/NF, promoveu uma condutividade elétrica da ordem de 1.5x10-3 S.cm-1. Os ensaios mecânicos mostram que o compósito BN/RC/NF possui propriedades físicas intermediárias entre as membranas de BN e o couro. Verificou-se que as membranas do compósito BN/RC/NF são de baixo custo, e podem ser facilmente preparadas. Estes compósitos apresentaram boa estabilidade térmica, adequadas propriedade mecânica e condutividade elétrica, e são apropriadas para produzir luvas, mantas e pisos antiestáticos. Além disso, o compósito BN/RC/NF são obtidos a partir de resíduos de curtumes de couro contribuindo para a redução de um problema ambiental.
Conductive composites are materials prepared combining the physical properties of polymers and conductive particles. In this work the preparation and characterization of conducting composites containing natural rubber (NR), leather residue (LR) and carbon black (CB) are presented. Samples were conformed in different percentages of mass of the NR, LR and CB constituents: 38/60/2.0; 37.5/60/2.5; 37/60/3.0 and 36.5/60/3.5, respectively, applying a pressure of 12 tons during 5 minutes at the temperature of 160°C, resulting in membranes with good quality and with the desired thickness. The NR/LR/CB composites were characterized using optical microscopy (OM), scanning electronic microscopy (SEM), atomic force microscopy (AFM), Raman and infrared spectroscopy, thermogravimetry (TG), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), mechanical test (stress vs. strain) and he electric conductivity measurements. The presence of the CB in composites NR/LR/CB provided an electric conductivity of the order of 1.5x10-3 S.cm-1. Mechanical tests show that the NR/LR/CB composites have intermediate properties between the membranes of NR and the leather. It was found that NR/LR/CB membranes can be easily prepared with very low cost. They presented good thermal stability, adequate mechanical and electric conductivity properties that are appropriate to produce gloves, blankets and antistatic floors. In addition, the NR/LR/CB composites are obtained from leather residues from tanneries contributing for the reduction of an environmental problem.
Conductive composites are materials prepared combining the physical properties of polymers and conductive particles. In this work the preparation and characterization of conducting composites containing natural rubber (NR), leather residue (LR) and carbon black (CB) are presented. Samples were conformed in different percentages of mass of the NR, LR and CB constituents: 38/60/2.0; 37.5/60/2.5; 37/60/3.0 and 36.5/60/3.5, respectively, applying a pressure of 12 tons during 5 minutes at the temperature of 160°C, resulting in membranes with good quality and with the desired thickness. The NR/LR/CB composites were characterized using optical microscopy (OM), scanning electronic microscopy (SEM), atomic force microscopy (AFM), Raman and infrared spectroscopy, thermogravimetry (TG), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), mechanical test (stress vs. strain) and he electric conductivity measurements. The presence of the CB in composites NR/LR/CB provided an electric conductivity of the order of 1.5x10-3 S.cm-1. Mechanical tests show that the NR/LR/CB composites have intermediate properties between the membranes of NR and the leather. It was found that NR/LR/CB membranes can be easily prepared with very low cost. They presented good thermal stability, adequate mechanical and electric conductivity properties that are appropriate to produce gloves, blankets and antistatic floors. In addition, the NR/LR/CB composites are obtained from leather residues from tanneries contributing for the reduction of an environmental problem.
Descrição
Palavras-chave
Compostos poliméricos, Borracha, Raspa de couro, Negro de fumo, Natural rubber, Leather of scrap, Carbon black
Como citar
ALVES, Aguinaldo Lenine. Preparação e caracterização de compósitos condutores obtidos a partir da borracha natural com raspa de couro e negro de fumo. 2009. 109 f. Tese (doutorado) - Universidade Estadual Paulista, Faculdade de Ciências de Bauru, 2009.