Influência dos métodos de fotoativação e fontes de luz nas propriedades de diferentes resinas compostas
Carregando...
Data
2010-03-19
Autores
Costa, Simone Xavier Silva [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Estadual Paulista (Unesp)
Resumo
O objetivo deste trabalho, dividido em três estudos, foi avaliar: (1) a influência da utilização de diferentes fontes de luz e métodos de fotoativação sobre o grau de conversão e a contração de polimerização de uma resina composta nanoparticulada; (2) a influência da utilização dos diferentes métodos de fotoativacao, disponibilizados por aparelhos LED de 2a geração, sobre a contração volumétrica das resinas compostas microhíbrida e nanopartículada e (3) as propriedades térmicas e o grau de conversão das resinas compostas microhíbrida e nanopartículada, submetidas aos diferentes métodos de fotoativação disponibilizados por aparelhos LED de 2a geracao. No primeiro estudo, o grau de conversão (GC) foi avaliado pelo metodo da espectroscopia infravermelha transformada de Fourier (FT-IR) e as forças de contração (C) mensuradas em máquina de ensaios universal (EMIC). Os dados obtidos para o GC e C foram analísados estatísticamente pelo teste da análise de variancia (ANOVA), sendo que para as forças de contração, a correção de Welch e o teste Tamhane também foram empregados. No segundo estudo, a contração volumétrica foi avaliada por um mecanismo de vídeo e imagem (AcuvolR/Bisco) e os dados obtidos foram análisados estatísticamente pelos testes ANOVA e Tukey. No terceiro estudo, o método da calorimetria exploratória diferencial foi empregado para avaliar a temperatura de transição vitrea (Tg) e de degradação dos materiais e o GC por FTIR. Os dados relativos ao GC foram análisados estatísticamente pelos testes ANOVA e Tukey. Os resultados demonstraram diferenças na contração de polimerização de acordo com o método de fotoativação empregado. No primeiro e segundo estudos, mesmo empregando diferentes metodologias, o método de fotoativação contínuo apresentou os maiores valores de contração. Por outro lado,o GC não...
The aim of this work, divided into three studies, was evaluate: (1) the influence of different light sources and photo-activation methods on degree of conversion and polymerization shrinkage of a nanocomposite resin; (2) the influence of different photo-activation methods, available by the 2nd generation LED light-curing units, on the volumetric shrinkage of microhybrid and nanocomposite resins and (3) thermal properties and degree of conversion of microhybrid and nanocomposite resins submitted to different photo-activation methods available by 2nd generation LED light-curing units. In the first study, degree of conversion (DC) was evaluated by Fourier transform infrared spectroscopy (FT-IR) and shrinkage forces (S) were measured in a universal testing machine (EMIC). The data obtained for DC and S were analyzed by Analysis of Variance test (ANOVA) and for S Welch’s correction and Tamhane’s tests were also employed. In the second study, volumetric shrinkage was evaluated by video-imaging device (AcuvolR/Bisco) and data were analyzed by ANOVA and Tukey’s test. In the third study, differential scanning calorimetry was used in order to observe glass transition temperature (Tg) and degradation peak of the materials and DC was evaluated for FT-IR. The DC data were analyzed by ANOVA and Tukey’s test. The results showed differences in the polymerization shrinkage according to photo-activation method employed. In the first and second studies, the continuous photo-activation methods presented the highest values for shrinkage even though different methodologies were used to assess. Moreover, DC was not influenced by the photo-activation method but was influenced by light sources. The lowest DC values were observed for halogen light-curing unit. In the second study beyond the influence of the photo-activation... (Complete abstract click electronic access below)
The aim of this work, divided into three studies, was evaluate: (1) the influence of different light sources and photo-activation methods on degree of conversion and polymerization shrinkage of a nanocomposite resin; (2) the influence of different photo-activation methods, available by the 2nd generation LED light-curing units, on the volumetric shrinkage of microhybrid and nanocomposite resins and (3) thermal properties and degree of conversion of microhybrid and nanocomposite resins submitted to different photo-activation methods available by 2nd generation LED light-curing units. In the first study, degree of conversion (DC) was evaluated by Fourier transform infrared spectroscopy (FT-IR) and shrinkage forces (S) were measured in a universal testing machine (EMIC). The data obtained for DC and S were analyzed by Analysis of Variance test (ANOVA) and for S Welch’s correction and Tamhane’s tests were also employed. In the second study, volumetric shrinkage was evaluated by video-imaging device (AcuvolR/Bisco) and data were analyzed by ANOVA and Tukey’s test. In the third study, differential scanning calorimetry was used in order to observe glass transition temperature (Tg) and degradation peak of the materials and DC was evaluated for FT-IR. The DC data were analyzed by ANOVA and Tukey’s test. The results showed differences in the polymerization shrinkage according to photo-activation method employed. In the first and second studies, the continuous photo-activation methods presented the highest values for shrinkage even though different methodologies were used to assess. Moreover, DC was not influenced by the photo-activation method but was influenced by light sources. The lowest DC values were observed for halogen light-curing unit. In the second study beyond the influence of the photo-activation... (Complete abstract click electronic access below)
Descrição
Palavras-chave
Resinas, Resinas compostas, Luzes de cura dentária, Espectroscopia infravermelho Fourier, Propriedades físicas e químicas, Composite resins, Curing lights, dental, Spectroscopy Fourier transform infrared, Physical and chemical properties
Como citar
COSTA, Simone Xavier Silva. Influência dos métodos de fotoativação e fontes de luz nas propriedades de diferentes resinas compostas. 2010. 138 f. Tese (doutorado) - Universidade Estadual Paulista, Faculdade de Odontologia de Araraquara, 2010.