Síntese e aplicação de sílica modificada na adsorção de Cu(II), Cd(II) e As(V) em meio aquoso: pré-concentração em amostras de águas naturais
Carregando...
Data
2017-10-05
Autores
Wondracek, Marcos Henrique Pereira [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Estadual Paulista (Unesp)
Resumo
Este trabalho relata o desenvolvido de métodos analíticos que visa à determinação de algumas espécies tóxicas e potencialmente tóxicas de metais e metalóides em níveis ultra-traço em amostra de água naturais, utilizando uma técnica analítica menos sensível, como a espectrometria de absorção atômica em chama (FAAS). Essa técnica foi escolhida por ser relativamente simples e possuir baixo custo operacional. A técnica de extração em fase sólida (EFS), utilizando um novo material sorvente, foi utilizada para separar e pré-concentrar os analitos. Este estudo demonstra o procedimento de uma nova rota sintética via co-condensação visando à produção de uma sílica mesoporosa organofuncionalizada com o ligante 4-amino-3-hidrazino-5-mercapto-1,2,4-triazole e, sua utilização como sorvente para pré-concentração/análise de especiação de íons metálicos em amostras de água. O material produzido foi caracterizado por espectroscopia na região do infravermelho (FTIR), BET, ressonância magnética nuclear (RMN) de 29Si e 13C, dentre outras. As características adsortivas desse material foram estabelecidas em estudos de batelada, onde se estudou o efeito do pH, cinética de adsorção e capacidade máxima de adsorção. A otimização multivariada foi utilizada para obtenção das melhores condições químicas e de fluxo no sistema de pré-concentração, permitindo avaliar as interações principais e secundárias entre os fatores. Por meio da análise dos espectros obtidos por FTIR foi possível observar bandas de estiramento C–H, C–Cl e (NH2) oriundos da fração orgânica do material. A área superficial foi de 369,84 m2 g-1com diâmetro médio de poros em 7,1 nm, relacionados a materiais mesoporosos. Os resultados obtidos por RMN de 29Si comprovam a formação do material híbrido, sintetizado por co-condensação, e o RMN de 13C confirma o ancoramento do ligante na matriz.
O pH que favorece a adsorção dos íons foi 5,0 para Cu(II) e 3,0 para Cd(II) e As(V). O modelo cinético de pseudo segunda ordem apresentou melhor ajuste aos dados experimentais, indicando adsorção química. Os dados de sorção desses íons metálicos mostraram bom ajuste ao modelo de Langmuir, com capacidade máxima de adsorção próxima aos valores obtidos experimentalmente, 0,057, 0,018 e 0,060 mmol g-1 para Cu(II), Cd(II) e As(V), respectivamente, indicando que a sorção ocorre em monocamada. Os parâmetros analíticos encontrados para o Cu(II) foram: fator de pré-concentração de 18,1; intervalo linear de 10,0 – 200,0 µg L-1 (R = 0,999) e LD de 1,45 µg L-1. Para o Cd(II): fator de pré-concentração de 15,8; intervalo linear de 2,0 – 100,0 µg L-1 (R = 0,999) e LD de 0,38 µg L-1. Para o As(V): fator de pré-concentração de 5,0; intervalo linear de 0,25 – 2,5 µg L-1 (R = 0,999) e LD de 0,039 µg L-1. A exatidão foi checada pelo método de adição e recuperação e/ou método comparativo com GFAAS ou ICP OES. As recuperações variaram de 97 – 106% (Cu), 100 – 105% (Cd), 88 – 103% (As(V)) e 96 – 106% (As(total)). Os resultados para Cu(II) determinados com os métodos propostos foram concordantes com os obtidos com o método comparativo. Conclui-se que o material produzido apresenta bom potencial para ser aplicado na extração/pré-concentração de cobre, cádmio e análise de especiação inorgânica de arsênio. Provou-se também que baixos limites de detecção e quantificação podem ser obtidos mesmo utilizando uma técnica menos sensível como a FAAS.
This paper reports on the development of analytical methods for the determination of some toxic and potentially toxic species in ultra - trace levels in natural water samples using a less sensitive analytical technique such as flame atomic absorpti on spectrometry (FAAS). This technique was chosen because it is relatively simple and has a low operating cost. The solid phase extraction technique (SPE) using a new sorbent material was used to separate and preconcentrate the analyte. This study demonstr ates the procedure of a new synthetic route using the technique of the co - condensation for the production of a mesoporous organo - functionalised silica with the 4 - amino - 3 - hydrazino - 5 - mercapto - 1,2,4 - triazole ligant and its use as a sorbent for preconcentrati on/ analysis of metal ion s speciation in water samples. The material produced was characterized by infra - red spectroscopy (FTIR), BET, 29 Si and 13 C nuclear magnetic resonance (NMR), among others. The adsorptive characteristics of this material were establis hed in batch studies, where the effect of pH, adsorption kinetics and maximum adsorption capacity were studied. Multivariate optimization was used to obtain the best chemical and flow conditions in the preconcentration system, allowing the evaluation of th e main and secondary interactions among the factors. By means of the analysis of the spectra obtained by FTIR, it was possible to observe C - H, C - Cl and (NH 2 ) stretch bands from the organic fraction of the material. The surface area was 369.84 m 2 g - 1 with a verage pore diameter at 7.1 nm related to mesoporous materials. The results obtained by 29 Si NMR prove the formation of the hybrid material, synthesized by co - condensation, and the 13 C NMR confirms the anchoring of the ligan t in the matrix. The pH 5.0 it w as favors the adsorption of the ions Cu (II), the pH 3.0 it was favors the adsorption of the Cd (II) and As (V). The kinetic model of pseudo second order showed better adjustment to the experimental data, indicating chemical adsorption. The adsorption data of Cu (II), Cd (II), and As (V) were similar to those of the Langmuir model, with a maximum adsorption capacity of 0.057, 0.018 and 0.060 mmol g - 1 for Cu (II), Cd(III) and As(V) , respectively, indicating that the sorption occurs in monolayer. The analyt ical parameters for Cu (II) were: preconcentration factor of 18.1; linear range of 10.0 - 200.0 μg L - 1 (R = 0.999) and LD of 1.45 μg L - 1 . For Cd (II): preconcentration factor of 15.8; linear range of 2.0 - 100.0 μg L - 1 (R = 0.999) and LD of 0.38 μg L - 1 . Fo r As (V): preconcentration factor of 5.0; linear range of 0.25 - 2.5 μg L - 1 (R = 0.999) and LD of 0.039 μg L - 1 . Accuracy was checked by addi tion and recovery method of the standard and/ or comparative method with GFAAS or ICP OES. The recovery ranged from 97 - 106% Cu(II), 100 - 105% Cd (II), 88 - 103% As (V) and 96 - 106% As (total)). The results for Cu (II) determined with the proposed methods were concordant with those obtained with the comparative. It is concluded that the material produced can be successfully applied in the extraction / preconcentration of copper, cadmium and analysis of inorganic speciation of arsenic and low limits of detection and quantification can be obtained even using a less sensitive technique such as FAAS.
This paper reports on the development of analytical methods for the determination of some toxic and potentially toxic species in ultra - trace levels in natural water samples using a less sensitive analytical technique such as flame atomic absorpti on spectrometry (FAAS). This technique was chosen because it is relatively simple and has a low operating cost. The solid phase extraction technique (SPE) using a new sorbent material was used to separate and preconcentrate the analyte. This study demonstr ates the procedure of a new synthetic route using the technique of the co - condensation for the production of a mesoporous organo - functionalised silica with the 4 - amino - 3 - hydrazino - 5 - mercapto - 1,2,4 - triazole ligant and its use as a sorbent for preconcentrati on/ analysis of metal ion s speciation in water samples. The material produced was characterized by infra - red spectroscopy (FTIR), BET, 29 Si and 13 C nuclear magnetic resonance (NMR), among others. The adsorptive characteristics of this material were establis hed in batch studies, where the effect of pH, adsorption kinetics and maximum adsorption capacity were studied. Multivariate optimization was used to obtain the best chemical and flow conditions in the preconcentration system, allowing the evaluation of th e main and secondary interactions among the factors. By means of the analysis of the spectra obtained by FTIR, it was possible to observe C - H, C - Cl and (NH 2 ) stretch bands from the organic fraction of the material. The surface area was 369.84 m 2 g - 1 with a verage pore diameter at 7.1 nm related to mesoporous materials. The results obtained by 29 Si NMR prove the formation of the hybrid material, synthesized by co - condensation, and the 13 C NMR confirms the anchoring of the ligan t in the matrix. The pH 5.0 it w as favors the adsorption of the ions Cu (II), the pH 3.0 it was favors the adsorption of the Cd (II) and As (V). The kinetic model of pseudo second order showed better adjustment to the experimental data, indicating chemical adsorption. The adsorption data of Cu (II), Cd (II), and As (V) were similar to those of the Langmuir model, with a maximum adsorption capacity of 0.057, 0.018 and 0.060 mmol g - 1 for Cu (II), Cd(III) and As(V) , respectively, indicating that the sorption occurs in monolayer. The analyt ical parameters for Cu (II) were: preconcentration factor of 18.1; linear range of 10.0 - 200.0 μg L - 1 (R = 0.999) and LD of 1.45 μg L - 1 . For Cd (II): preconcentration factor of 15.8; linear range of 2.0 - 100.0 μg L - 1 (R = 0.999) and LD of 0.38 μg L - 1 . Fo r As (V): preconcentration factor of 5.0; linear range of 0.25 - 2.5 μg L - 1 (R = 0.999) and LD of 0.039 μg L - 1 . Accuracy was checked by addi tion and recovery method of the standard and/ or comparative method with GFAAS or ICP OES. The recovery ranged from 97 - 106% Cu(II), 100 - 105% Cd (II), 88 - 103% As (V) and 96 - 106% As (total)). The results for Cu (II) determined with the proposed methods were concordant with those obtained with the comparative. It is concluded that the material produced can be successfully applied in the extraction / preconcentration of copper, cadmium and analysis of inorganic speciation of arsenic and low limits of detection and quantification can be obtained even using a less sensitive technique such as FAAS.
Descrição
Palavras-chave
Sílica mesoporosa, Organofuncionalização, Extração em fase sólida, Espécies metálicas, Pré-concentração, Especiação, Amostras de água, 4-amino-3-hidrazino-5- mercapto-1,2,4 –triazol, Mesoporous sílica, Organofunctionalized, 4-amino-3-hydrazino-5-mercapto-1,2,4-triazole, Solid phase extraction, Metal species, Preconcentration, Speciation, Water samples