Bond stability of a universal adhesive system to eroded/abraded dentin after deproteinization
Nenhuma Miniatura disponível
Data
2018-05-01
Autores
Augusto, M. G. [UNESP]
Torres, C. R.G. [UNESP]
Pucci, C. R. [UNESP]
Schlueter, N.
Borges, A. B. [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
Objective: Erosive/abrasive challenges can potentially compromise bonding to dentin. Aiming to improve the quality and stability of bonding to this substrate, this study investigated the combined effect of erosion and toothbrush abrasion on the microtensile bond strength (μTBS) stability to dentin using a universal adhesive system in total and selfetching modes, associated or not associated with deproteinization. Methods: Bovine dentin specimens were divided into five groups according to the organic matrix condition (n=20): control (C); erosion (E); erosion + abrasion (EA); erosion + sodium hypochlorite (EH); erosion + abrasion + sodium hypochlorite (EAH). The groups were further divided (n=10) according to the mode of application (total or self-etching) of a universal adhesive. After the bonding procedure, composite blocks were built up, and the samples were cut to obtain sticks for μTBS testing. For each specimen, one-half of the sticks was immediately tested, and the other one-half was tested after artificial aging (5000 thermocycles, 5°C and 55°C). Results: Three-way analysis of variance (α=5%) showed a significant difference for the triple interaction (p=0.0007). Higher μTBS means were obtained for the EH and EAH groups compared with the E and EA groups. The control group showed immediate μTBS values similar to that of the E and EA groups for both bond strategies. Conclusions: Erosion and erosion/abrasion did not significantly influence the immediate μTBS to dentin. Artificial aging reduced μTBS values for the groups C, E, and EA using the totaletching mode. Deproteinization maintained the bond stability to artificially aged eroded and eroded/abraded dentin.
Descrição
Palavras-chave
Como citar
Operative Dentistry, v. 43, n. 3, p. 291-300, 2018.