Rotor failure detection of induction motors by wavelet transform and Fourier transform in non-stationary condition
Nenhuma Miniatura disponível
Data
2015-07-01
Autores
da Costa, Cesar
Kashiwagi, Masamori [UNESP]
Mathias, Mauro Hugo [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
This case study presents two diagnostic methods for the detection of broken bars in inductionmotors with squirrel-cage type rotors: FFT method and waveletmethod. The FFT method allows detecting broken rotor bar when the motor operates under a load, but if the machine is decoupled from the mechanical load, the side band components associated with broken bars do not appear. TheWTis a powerful signal-processing tool used in power systems and other areas. New wavelet-based detection methods that are focused on the analysis of the startup current have been proposed for the detection of broken bars. Since the transient stator current signal is not periodic, it is not amenable to analyze the signal by FFT method. In addition, it is impossible to estimate the time of the fault occurrence using the FFT. In this paper, our main goal is to find out the advantages of wavelet transform method compared to Fourier transform method in rotor failure detection of induction motors.
Descrição
Palavras-chave
Diagnostic, Digital signal processing, Rotating electrical machine
Como citar
Case Studies in Mechanical Systems and Signal Processing, v. 1, p. 15-26.