Dynamic Hardness of Charcoal Varies According to the Final Temperature of Carbonization
Nenhuma Miniatura disponível
Data
2018-01-01
Autores
Abreu Neto, Raul De
Assis, Albert Augusto De [UNESP]
Ballarin, Adriano Wagner [UNESP]
Hein, Paulo Ricardo Gherardi
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
Hardness has been considered to be one of the most important mechanical indicators of material quality. Here, an automated portable hardness tester was used to evaluate dynamic hardness (DH) of vegetable charcoal for industrial application, correlating these results to vegetal material and final temperature of carbonization. Wood specimens from nine vegetal materials were pyrolysed at final temperatures of 300, 450, 600, and 750 °C. A total of 45 wood specimens were used as the sample control. DH of wood and charcoal was determined by an automated portable hardness tester. Wood specimen DH varied from 12.9 to 44 MPa. Wood density (ρ) presented a high positive correlation (r = 0.94) with wood DH. The heavier wood species (ρ = 988.6 kg m-3) is on average 1.93 times denser than the lighter wood (ρ = 512 kg m-3), while the harder wood (DH = 44 MPa) is 3.41 times harder than the softer material (DH = 12.9 MPa). Charcoal specimen DH significantly varies with the final temperature of carbonization: DH was 10.89 MPa for charcoal specimens produced at 300 °C, 3.05 MPa for charcoal produced at 450 °C, 3.44 MPa for charcoal produced at 600 °C, and 4.59 MPa for charcoal produced at 750 °C. Hardness variation between vegetal materials also decreases with the final temperature of carbonization. These findings are important, especially for industries that use the Eucalyptus charcoal as a reducing agent and supporting material in blast furnaces for producing green steel. In this industrial segment, a homogeneous product is necessary and the control of the characteristics of the raw material becomes essential.
Descrição
Palavras-chave
Como citar
Energy and Fuels.