Solid phase extraction using SiO2/Al2O3/TiO2 ternary oxide for Cu2+ preconcentration
Carregando...
Data
2019-01-01
Autores
Pinheiro, Evelyn F.
Rodrigues, José Guilherme A. [UNESP]
Honório, Gláucio G.
da Cunha, Jéssica N.
de Paula, Carlos Eduardo R.
de Andrade, Débora F.
Ribeiro, Emerson S. [UNESP]
D’Elia, Eliane
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
The present work aims at studying the preconcentration of Cu2+ ions by solid phase extraction using SiO2/Al2O3/TiO2 ternary oxide as adsorbent material. This methodology consists of the affinity of the analyte for the adsorbent material and its subsequent elution with the least amount of solvent. Subsequently, the aqueous phase containing the extracted analyte was collected and analyzed by square wave anodic stripping voltammetry (SW-ASV). For the applied solid phase extraction (SPE) methodology, a complete factorial design was carried out with 3 variables at 2 levels (pH, elution flow rate and analyte concentration) to optimize the extraction conditions. The results showed that at pH 9, the SiO2/Al2O3/TiO2 oxide presents excellent Cu2+ adsorption capacity with recovery values between 81.0 and 104% for this pH range. The limit of detection (LOD) and limit of quantification (LOQ) values were determined to be 1.71 and 5.64 μg L-1, respectively. The study of recovery for SPE method revealed results of 102 and 103%.
Descrição
Palavras-chave
Cachaça, Copper ions, Preconcentration, Solid phase extraction, Square wave anodic stripping voltammetry, Ternary oxide
Como citar
Journal of the Brazilian Chemical Society, v. 30, n. 7, p. 1534-1540, 2019.